Buying Advice L2600DT or keep looking
- Thread starter Tundra
- Start date
- Views: 17144
-
- Tags
- kubota l2600
azbinder
Gold Member
It should be on the frame rail above the front axle, but I don't remember which side. If you get me the 5 digit serial number and model number from the plate, I can tell you when and where it was first sold.
azbinder
Gold Member
"L"'s are cast iron
Carl_NH
Elite Member
- Joined
- Apr 5, 2002
- Messages
- 3,665
- Location
- Coastal NH
- Tractor
- 01 Kubota B21TLB, 2010 Ferris 52" ZTR, Cub Cadet 1811, Gravely Super8
The L's are stout tractors and the BH if it hasnt been abused should be fine on the 3PTH - its not "ideal" but it will work fine. You might be able to get a subframe and adapt to the L frame if you want to beef it up.
The price is reasonable for the age and size and will work as an all around tractor/BH. The hardest part will be removal and replacement of the BH - I had an L185DT (1983 vintage) with 3PTH hoe and it was a tough machine.
The price is reasonable for the age and size and will work as an all around tractor/BH. The hardest part will be removal and replacement of the BH - I had an L185DT (1983 vintage) with 3PTH hoe and it was a tough machine.
Carl_NH
Elite Member
- Joined
- Apr 5, 2002
- Messages
- 3,665
- Location
- Coastal NH
- Tractor
- 01 Kubota B21TLB, 2010 Ferris 52" ZTR, Cub Cadet 1811, Gravely Super8
Tundra,
Based on the pics I'd say you did very well - this machine will do a lot of work and not complain. For the price and hours you have nearly twice the lift capacity of the BX (450 x2.2KG = 1000 Lbs Lift in the bucket not at the pins).
Does this have the PTO pump for the BH or is it off the tractor? Also I think the FEL frame goes all the way back and attaches to the rear axle mount so this further strenghtens the BH and rigidity of the tractor. I see you have one in the shed too is that the Mistsubishi? Looks big - more like a ford front end.
Where are you in western PA? I was born in Kane, raised on a farm up there, still have some land in the area.
Thanks for the pictures - I think you made a good buy and have acquired a very nice nice machine.
Based on the pics I'd say you did very well - this machine will do a lot of work and not complain. For the price and hours you have nearly twice the lift capacity of the BX (450 x2.2KG = 1000 Lbs Lift in the bucket not at the pins).
Does this have the PTO pump for the BH or is it off the tractor? Also I think the FEL frame goes all the way back and attaches to the rear axle mount so this further strenghtens the BH and rigidity of the tractor. I see you have one in the shed too is that the Mistsubishi? Looks big - more like a ford front end.
Where are you in western PA? I was born in Kane, raised on a farm up there, still have some land in the area.
Thanks for the pictures - I think you made a good buy and have acquired a very nice nice machine.
bullbreaker
Elite Member
Tundra Big Congrats ! :thumbsup: From pic's looks to be in DANG great shape. OrangeTractorTalks | Kubota Tractor Tips, Classifieds, Specifications and Discussion
Might of even sleeped under roof of some kind paint looks that good.
Boone
Might of even sleeped under roof of some kind paint looks that good.
Boone
Bluegill2
Veteran Member
- Joined
- Jan 21, 2012
- Messages
- 1,876
- Location
- Success Missouri
- Tractor
- Kubota L3800DT, L3750DT Shuttle
Looks very good, man!!!
cj7
Gold Member
Looks like a good piece of equipment.