L3830 service indicator

[RickB]

How does one go about resetting the wrench icon that indicated a service interval has elapsed on an L3830 HST with a digital dash? I am a New Holland tech that services several Kubotas along the way, and this issue came up today. The customer can't find their op manual, which surely has this info. Thanks in advance, RickB.

 

[sevilla]

To reset the wrench lamp: Keep pushing both display mode switch and traveling mode switch for two or more seconds while in HOUR METER MODE.
In my esperience the lights of the panel must be on but the engine not running.

 

[sevilla]

Actually I'm not sure if the engine has to be running or not. One of the two for sure. Sorry but the manual does not say it. Was just my (forgotten) experience.

 

[RickB]

To reset the wrench lamp: Keep pushing both display mode switch and traveling mode switch for two or more seconds while in HOUR METER MODE.
In my esperience the lights of the panel must be on but the engine not running.

Thanks very much, it worked exactly as you described.