LA302 FEL o-rings

John762 · Aug 1, 2006

Does anyone know where to find the o-ring that is inside the quick coupler female fitting on the hoses that lead from the hydaraulic cylinders on the loader and connect to the 4 position control valve? I have tried my dealer where I bought the tractor and they could not find one on their parts diagram for that loader and they had some spares but none of them matched. The parts guy said I would probably have to buy the coupler. I told him I would look around and only do that has a last resort. I have found one in the proper diameter but thicker that would fit but not allow the coupler to completely couple. Any help would be appreciated.
John

art · Aug 1, 2006

There is nothing in the books for this by part number. We do match them.

biker128pedal · Aug 1, 2006

What is the color, thickness and diameter (outside or inside)? You should be able to buy a package of 100 for about $10 without shipping.

http://www.mcmaster.com/ search for o-ring

Mike

John762 · Aug 2, 2006

can one be matched that has a chunk torn out of it? At the auto part's stores I have tried they only had something close and after 2 times neither one has worked. I have one last source to try that makes hoses and gaskets hopefully this will work. I will probably take a good one off of the other hose to try and get a better match.
john

lawn_king · Aug 2, 2006

I had the same o ring problem with my 302 fel, i was lucky and actually found a match in my junk o ring box, keep searching,there has to be a match out there somewhere.