Land Shark Hydraulic Landscape Rake

[EverythingAttachments]

I have been thinking of building a rake to replace the blade on my Landpride rear blade. I know Everything Attachments has sold various kits before. I wonder if they would consider selling me just the 96" crossbar with the tines only, from their extreme duty rake? I would enjoy adapting this to my frame, and perhaps save some money. i like the design of their crossbar, and this would be hard to fabricate with my basic tools. So if one of the EA guys read this, please consider my request. I actually asked the salesman on their phone today and he blew off my request. Maybe one of their contributors to this site would reconsider this. So if an EA guy reads this, would you? PM me if you like.

Sent from my iPad using TractorByNet

The tine bar with all of the laser cut holes and forming is our signature design that has been extremely durable for a long time.

I didn't mean to sound like I was blowing you off, but Ted just is not interested in selling a tine bar by itself if you don't have our rake.
Travis

 

[HCJtractor]

I understand. Thank you for the reply. My choice of words was bad. I was just hoping you would reconsider.
I've looked at many designs, and your laser cut bar appears to be the best. As usual, your company really puts a lot of effort into design, and the quality of your products reflect this. I just wanted to build my own, as I enjoy projects. The way you attach your tines to the bar seems far superior to just bolting them on, as it allows some movement, and I expect it reduces breakage. If I change my mind and decide to buy one, your rake is by far the best and most value of any others I see.

I already have a Landpride 35 series blade. They actually sell a kit to convert it to a rake. But its not much less than your entire rake, and I like yours better.

I enjoy your input in the forum, your videos are most informative. Thanks again.

<CALayer: 0x16d18fe0>

 

[EverythingAttachments]

I understand. Thank you for the reply. My choice of words was bad. I was just hoping you would reconsider.
I've looked at many designs, and your laser cut bar appears to be the best. As usual, your company really puts a lot of effort into design, and the quality of your products reflect this. I just wanted to build my own, as I enjoy projects. The way you attach your tines to the bar seems far superior to just bolting them on, as it allows some movement, and I expect it reduces breakage. If I change my mind and decide to buy one, your rake is by far the best and most value of any others I see.

I already have a Landpride 35 series blade. They actually sell a kit to convert it to a rake. But its not much less than your entire rake, and I like yours better.

I enjoy your input in the forum, your videos are most informative. Thanks again.

<CALayer: 0x16d18fe0>

It's all good. Thanks for the compliments.
Our optional tine bar for the Land Shark hydraulic blade should interchange with your 35 series blade and I really wouldn't recommend putting anything lighter on that beastly frame.

As with the Land Pride conversion option, you'll be about the same $$ as our entire, slightly lighter Category 1-2 Rake after you add some shipping because it'd have to ship separately.

Either of the above options would be much better than having a Land Pride rake!
Travis