Landpride FDR2572 & JD I-Match

[BloomingtonMike]

Can you please get me the dimesions of this adapter and show a picture of it installed with the mower hooked up. I may be buying a Woods XT172 and will need a somution most likely ike this. Thanks. Mike.

 

[Neophyte]

The plate is 1/4" thick steel and is 2" wide. The plate is slightly rounded on either end, but the longest point is 7-1/8". The 3/4" holes are 5-1/16" center to center.

I will take some pictures the next time I have it hooked up to the mower, which should be sometime this week.

 

[Neophyte]

Here are the pictures I promised. They show the floating top link when the RFM is floating and raised. I finally got around to painting them JD Green. They seem to do the trick.

 

[cwesterfield]

your configuration need two more plates attached at the end and then they go through the top pin to the quick hitch itself. This lets the mower float.

 

[PapaPerk]

Here are the pictures I promised. They show the floating top link when the RFM is floating and raised. I finally got around to painting them JD Green. They seem to do the trick.

Thank you for posting these pics!!!!! :thumbsup: