Lawn Striping Attachment

   / Lawn Striping Attachment
  • Thread Starter
#11  
I already took some stiff truck bed mat at fastened it to an aluminum angle. Then, bolted it to the drawbar (to go up and down with the deck). It woks a little, but not like a roller. I will try this weekend to lower it a little to really force the grass to lay over and see. I thought it was the height of the cut grass not being long enough, but my neighbor cuts at about 2 inches, and his looks like Wrigley Field. I'm cutting at 3 to 3-1/2 inches to let it fill in, but not alot of striping going on. I am wondering if it is the "field grass" I have.
 
   / Lawn Striping Attachment #12  
Gator:
Which one of those cribs were yours? /forums/images/graemlins/grin.gif Some darn nice digs there!

I wonder if there is a roller for dandilions and clover...I might be better served with that one. /forums/images/graemlins/grin.gif
 
   / Lawn Striping Attachment
  • Thread Starter
#13  
So 'ya know, I moved my flap to about just three inches above the grass when the 3pt is down, and WOW! I'll post a picture as sson as it stops raining! I really am impressed with how it works. Not as good as a roller, I think, but darn nice for the cost.
 
   / Lawn Striping Attachment #14  
RobertM,

Could you also post a pic of the flap and how you mounted it?

Thanks...
 
   / Lawn Striping Attachment #15  
I would love to see some pictures of peoples lawn striping equipment . It would be very helpful because I am wanting to put one on my B2910 with 72 inch belly mower.
 
   / Lawn Striping Attachment #16  
EDIT:
Hmm... that's odd, as I clicked on it and it worked the day I posted it. So I started poking around and found that the page has changed from a .html extension to a .php extension...

Here's the correct link(at least it was 5 minutes ago...)

http://www.simplicitymfg.com/lawn_striping.php

Thanks for the heads up, Pineridge. /forums/images/graemlins/laugh.gif

Good reading.
 
   / Lawn Striping Attachment #17  
MossRoad that link doesn't appear to be a valid one. /forums/images/graemlins/frown.gif
 
   / Lawn Striping Attachment
  • Thread Starter
#20  
Here is the striping attachment I made... it is in the rough stages as I want to make it a "quick-disconnect" type so I can use my drawbar for other things. I'm working on it now,and will post the QD later. Let me all know what you think.
 

Tractor & Equipment Auctions

2014 UTILITY 53X102 DRY VAN TRAILER (A45678)
2014 UTILITY...
2015 VOLVO VNL TANDEM AXLE DAY CAB TRUCK (A45678)
2015 VOLVO VNL...
2011 Chevrolet Cruze Sedan (A46684)
2011 Chevrolet...
2007 K-K Systems S/A Solar Towable Message Board (A46683)
2007 K-K Systems...
2014 WESTERN STAR FACTORY DUMP TRUCK TRI AXLE (A45679)
2014 WESTERN STAR...
2019 KENWORTH T880 (INOPERABLE) (A48992)
2019 KENWORTH T880...
 
Top