K5lwq
Elite Member
- Joined
- Aug 6, 2017
- Messages
- 4,692
- Location
- Mineola, TX
- Tractor
- Kioti LK2554, Branson 4815C, Satoh Beaver, Speedex
I have been researching hydraulic pumps for my LK2554 and ran across an old thread where someone upgraded their LK3054 to a 10GPM pump. Does anyone know if this pump would fit on the LK2554? Tractor Joe is suggesting that their replacement pump fits both models.
The issue I am having is that below 1500 RPM I get very little or no movement on loader or 3PH. I can get 2100 PSI when the tractor is above 2000 RPM. If I try to curl the bucket while raising the boom, the boom will fall at a pretty fast rate. As long as I am careful not to do that, it's not a big deal.
It seams to me that my pump is a little weak and higher flow rate would really help. Any thoughts?
The issue I am having is that below 1500 RPM I get very little or no movement on loader or 3PH. I can get 2100 PSI when the tractor is above 2000 RPM. If I try to curl the bucket while raising the boom, the boom will fall at a pretty fast rate. As long as I am careful not to do that, it's not a big deal.
It seams to me that my pump is a little weak and higher flow rate would really help. Any thoughts?