Loader Hydraulics

   / Loader Hydraulics #1  

Maxfli

Silver Member
Joined
Feb 2, 2004
Messages
178
Location
Chicago, Far west
Tractor
JD 2210
I recently added a used 48" bucket Loader to my Bolens Iskei Tractor. Everything is working pretty well and I am impressed with how it works and the Lift. This issue is the 2 Spool Loader valve is well used and kind of loose in operation. It really will not hold the bucket at a level position. If I am driving with it loaded any bump is enough to cause the weight of the valve handle to activate the valve and the Bucket starts to raise while driving, not very safe. I know very little about hydraulics, is there an ajustment to vavle tension, does need to be replaced , can it easily be rebuilt. The whole unit was painted before I got it, including the manufactures label so I am not sure who it is made by.
 
   / Loader Hydraulics #2  
I think i would just take the valve to the hyd. shop and have them rebuild it some times it cheaper and easier, most repair shops know the makes on sight. Saves a lot of chasing around
 

Tractor & Equipment Auctions

16ft T/A Flatbed Equipment Trailer (A50322)
16ft T/A Flatbed...
2018 DRAGON PRODUCTS 130BBL VACUUM TRAILER (A53843)
2018 DRAGON...
2008 OVERLAND TANK KILL TRAILER (A52472)
2008 OVERLAND TANK...
2018 DRAGON ESP 130BBL VACUUM TRAILER (A53843)
2018 DRAGON ESP...
2011 DODGE CARAVAN (INOPERABLE) (A53843)
2011 DODGE CARAVAN...
RHINO DB150 LOT NUMBER 73 (A53084)
RHINO DB150 LOT...
 
Top