Log splitter with lift table and 4 way wedge

[Cantoo]

Weld your initials into the foot plate as advertisement. It will stamp most pieces.

 

[chainsawnut]

and maybe a license number makes it harder for a thief

 

[sharp101]

Finally got it painted.

 

[J_J]

Just don't understand why you built something nice, and put galvanized water pipe fittings in the hyd circuit.

Recommend you replace them with hyd fittings.

 

[sharp101]

JJ, I just haven't gotten to that yet, but i will getter done. It's hotter up here then it is in Jacksonville now. Have a nice day.

 

[Artisan]

J_J is never freakin wrong! I swear the man is a plethora of info
and he calls a spade a spade...LISTEN TO HIM, NOW!!!

What is the rating for a 1/4 or 3/8" Mallable Street 90 J_J ? 150 Pounds?

Be VERY careful till you FIX It bro.... I am a plumbing contractor,
I have seen HOLES no less in mallable fittings! BELIEVE IT. You could build
pressure then POP, and you could get a 2500 PSI hydraulic fluid
squirt to the inner thigh and the twins are now quads...BELIEVE IT .

GAWD DO NOT DO IT PEOPLES!

Nice Splitter BTW...

 

[Ed of all trades]

One pin hole and hydro. fluid is enjected under the skin and you have a trip to the hospital and a while to stay there as well. hydro. oil is very poisionous and you DON'T want that to happen. Dont even crank the engine with those fittings in there!!!

 

[stormdodger]

Sweet build !!!!!!! I would strongly agree with changing those pipe to the proper fittings, there cheap. Wouldnt want you to lose an eye now!!!

 

[Zeus1]

Your splitter looks great...but those pipe fittings are a death trap!

thanks

 

[sharp101]

Just got new hydraulic fittings installed. Video will be coming soon.