Looking for 3-point adapter for Loader

[TGF]

I have searched the site and found several of the opposite of what I want, adapters that let loader accessories be used with the 3-point. I am actually looking for something I can put on my loader arms that allows me to pick up and manipulate 3 point attachments to assist with maintenance jobs and storage. I have a JD 300 series loader, so it would need to be a JD QT to 3-point or iMatch would be really convenient.

Something like this only for JD.

HORST WELDING | HLA >> THREE POINT HITCH ADAPTER

 

[TGF]

no body?

 

[777777]

http://www.tractorbynet.com/forums/customization/142456-3-point-hitch-loader-arms.html

 

[J_J]

How about something like this.

http://www.landpride.com/ari/attach/lp/public/manuals/320-019m.pdf

 

[NOTV8]

I built something similar... made HF quick hitch.

 

[TGF]

How about something like this.

http://www.landpride.com/ari/attach/lp/public/manuals/320-019m.pdf

That is exactly what I am looking for but for the JD QT loader hookups. I can't use skidsteer attachements. First time I am annoyed that I didn't get a Kubota.

 

[tungularafishcamp]

Couldn't you just weld a jd quick connect plate to a imatch and use that?

Where have you found setups to put a fel quick connect on the 3pt arms. I have been looking for something like that but have had no luck and figured I would have to make something when I had time.

 

[dfkrug]

My approach was a little different since I wanted the same side tilt
capability you have with a rear 3PH. I welded up a 3PH with arms
and links that fits on my pallet fork frame.

Here is my rake, which I can adjust for side tilt. I also fit a pole inside
the rake frame after removing the rake, and have a front-mounted
boom pole.

 

[Runner]

Here's another one:

http://www.tractorbynet.com/forums/build-yourself/144744-loader-mounted-quick-hitch.html

 

[TGF]

Couldn't you just weld a jd quick connect plate to a imatch and use that?

Where have you found setups to put a fel quick connect on the 3pt arms. I have been looking for something like that but have had no luck and figured I would have to make something when I had time.

Sadly I can't weld for beans, so it looks like what I am going to do is go down to TSC and buy a 3-point QC and a hitch reciever, hit the JD dealership buy a set of loader connects, then go to a local welder and have him put it all together for me. Thanks for the help guys.

 

[smyth agri products]

[hello lads iam new factory olny open we make them type of stuff now our place is in ireland
so if u looking for them email me smyth-agri-products@live.ie or www,smythengineering.com or
Smyth Agri Products Ltd | Facebook
thanks but not dear to buy come any brackit to fit most loader