Backhoe LS backhoe

[hutchman]

I got mine at the first of July and it was 7500 dollars including shipping, labor, and bucket.

I got the Ansung BH760 with two buckets for $5100 but it's up to me to figure out how to mount it. It's made to be used as a 3pt. mount backhoe but I didn't order the 3pt. kit for it and saved some $$$ that way. I'll start posting details of my build soon.

 

[BlessedMess]

Finally got around to reconnecting my backhoe today, and it wasn't that hard. Sorry, no pics or video.

What was time consuming tho was maneuvering the front of the BH frame (opposite the bucket and dipper) to fit into the corresponding bracket located under the engine. And then when it was all lined up, it was hard to get it that last 1/4" or so in order to fully reinsert the pin. Next time thinking or using some old tires or sizing some wood blocks to maintain frame height after disconnecting hydraulic hoses (within a couple days the stabilizers lost pressure and sank to the ground). Have you tried anything like that?

 

[Jesse Shoemaker]

I haven't tried but that is a good idea. Keep from Gettin on and off the tractor a half a dozen times to see if the front is lined up.