I have just about settled on a Mahindra 3215 for a replacement tractor for a tired Mitsubishi. I know JD, NH, etc. all have a lot more add-ons than the lesser known brands , but wondered if there is much out there for Mahindra specifically a front mount snowplow or a cab. I know about the loaders, and know about a lot of the generic mowers, scraper blades, tillers, plows, etc.
Mahindra implements, etc
- Thread starter day52
- Start date
- Views: 960
George2615
Super Member
You may have to go aftermarket for things like the plow, and cab. Check with your dealer to see if they will offer a cab for the 3215. If not I'm sure Curtis or Sims cab companies will probably offer a soft cab. I think my dealer only had Mahindra attachments such as loader, backhoe, midmount mower and they're made for them by another company. (Mine are made by KMW). As far as 3pt. equipment goes I think they figure your going to shop around for the best price so they don't make it and the dealer usually sells different brands of implements. I made my own cab just to keep the winter wind off me when snowblowing but found the loader works much faster pushing snow. Last winter I used 4 - 1" pins to hold my bucket on. when snow came I pulled the pins and mounted a 7' blade to the loader arms with those 4 pins into brackets I welded on the back of the blade. then just straight bladed the snow with that. There's a few pics in the photo section under other brands / mahindra. There are also companies that sell P/A blades and setups for tractors. A few guys have posted pics of them and a lot of us being pretty handy just build what we need like clamp on bucket forks, 3 pt. reciever hitches, etc. Post some pics of your 3215 if you get it. Everyone loves pics.
