Metal found in yard
- Thread starter Cliff_Johns
- Start date
- Views: 1838
bky
Gold Member
isnt that a pin used in setting concrete forms?
OP
Cliff_Johns
Elite Member
Well now, Mith, that's a pretty good list of possibilities you have there. I especially like:
</font><font color="blue" class="small">( A tool for forcing into small openings to see how far it will go in before it gets stuck )</font>
and since I have a variety of tools designed for this purpose, I woundn't be at all suprised if you were right, but it's the hole and the slot that have me wondering. If your suposition is correct, then these details must be used in some way for extraction. This of course implies that I have only part of a set -- the rest of the set being the tools used to engage the slot and hole for removal of said thingy from previously discussed small opening.
Cliff
</font><font color="blue" class="small">( A tool for forcing into small openings to see how far it will go in before it gets stuck )</font>
and since I have a variety of tools designed for this purpose, I woundn't be at all suprised if you were right, but it's the hole and the slot that have me wondering. If your suposition is correct, then these details must be used in some way for extraction. This of course implies that I have only part of a set -- the rest of the set being the tools used to engage the slot and hole for removal of said thingy from previously discussed small opening.
Cliff
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,566
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
bky
I think you are the closest of any of the 'guesses' so far. /forums/images/graemlins/wink.gif
I think you are the closest of any of the 'guesses' so far. /forums/images/graemlins/wink.gif
DaveNay
Platinum Member
- Joined
- Aug 13, 2003
- Messages
- 834
- Location
- Waterman, DeKalb County, Illinois
- Tractor
- John Deere 855 MFWD; Oliver 1850 Gas
Thanks Cliff, I was looking for that. I musta dropped it last time I was over picking up shavings.
Dave
Dave
hobbyfarm
Veteran Member
Looks to me like the tool to remove a Morse Tapered bit. It takes a wedge type tool to remove a Morse type bit. The hole in it is to keep it handy to the milling machine (or drill press).
That's my best answer. /forums/images/graemlins/shocked.gif
That's my best answer. /forums/images/graemlins/shocked.gif
TOMLESCOEQUIP
Platinum Member
We called 'em snap ties.........used for joining metal concrete form sections together, does your house have poured concrete walls anywhere ?? You drive the wedges in & back out with a hammer............it's real easy to lose a few that way on every job..........
OP
Cliff_Johns
Elite Member
OK, your guys got it. I looked at the PDF and it sure fits the drawing of the concrete form thingy to a tee.
I'll be making more dirt tomorrow, maybe I'll find something else. This turned out to be quite educational.
(I still like Mith's answer though.)
Cliff
I'll be making more dirt tomorrow, maybe I'll find something else. This turned out to be quite educational.
(I still like Mith's answer though.)
Cliff
OP
Cliff_Johns
Elite Member
So Dave, did you want me to mail it to you then? (COD of course)
Cliff
Cliff
