MF35 Generator

   / MF35 Generator #1  

seaweaver

Member
Joined
Nov 21, 2010
Messages
26
Hey guys I do not think my Gen is working. I'm not familiar w/ Gen.s so what should I see as output? between what? I assume there is a voltage regulator(I see what looks to be one on the left side) just no rectifier or diode bridge as in
a an alternator correct?
If someone could breifly fill me in on what the terminals and out puts are I'd appreciate it.
One more, after heavy work in the pasture It developed an oil leak which appears to be from the top of the steering column...Any idea on that?
(!) crankcase vent tube blocked crating PIS to push oil up??? Oh I'm starting to wig myself out...
thanks
cw
 
   / MF35 Generator
  • Thread Starter
#2  
I saw a post about polarizing the gen prior to removal, What does this do? thanks
cw
 
   / MF35 Generator #3  
Not a lot of help but. We have a MF35. It was originally a 6 volt machine. It was converted to 12V before my Father bought it. It has a positive ground.

If yours is original I would expect a 6 to 7 volt output.
 
   / MF35 Generator
  • Thread Starter
#4  
OUCH! pos ground like my old 1976 toyota????
I hooked up the lightsss.. oh man. They work but not as bright as I thought...I did it thinking the single wire return is the Pos... I hope I have not burned something.

Any idea on the oil? or how to stop my knee/ankle that works the clutch to stop hurting?(snort!)
 
Last edited:

Tractor & Equipment Auctions

2006 Ford F-150 Ext. Cab Pickup Truck (A46684)
2006 Ford F-150...
2018 VOLVO VNL TANDEM AXLE SLEEPER (A45678)
2018 VOLVO VNL...
2017 Peterbilt 567 Tri-Axle Dump Truck (A46683)
2017 Peterbilt 567...
4ft Cultipacker (A49251)
4ft Cultipacker...
Wolverine TCR-12-48H SKid Steer Trencher (A47371)
Wolverine...
Metal Platform Cart (A49251)
Metal Platform...
 
Top