Mini Excv. Info ??

[Carl_NH]

In my opinion this 6K machine is one of the best for the money at $22K 2.8 Ton, Mini Excavator w/ Diesel Engine | CFG-STE35SR

It's built by Shantui who makes this machine for Kobelco also, and Shantui make many other bigger machines - excavators and dozers.

If has a Yanmar engine and two speed enclosed drives, a cab etc, and for $22K for a new machine is a good value.

 

[Carl_NH]

The unit mentioned above CFG STE 35 SR has a hydraulic flow of 87 LPM or 23 GPM and a digging force of 24KN or 5400Lbs. My Kubota B21 has a digging force of around 3200 lbs or 14 KN so this machine was the better step up - But I don't need it - I "wanted it" and it didn't fit in my barn (too tall).

I needed something to load/move rocks and granite into the bucket and be the "third hand" with the tractor, and the smaller Chinese diesel Mini 1.8T fits the bill for me.

 

[John White]

Is there any paterculiar make I should avoid? Some say sty the gas engine because cheaper to replace, others say diesel, because you wont have to replace it if taken care of and higher resale value.

 

[Carl_NH]

When it comes to name brands of Chinese-made machines, only a few actually "make" them—the rest are assembled from purchased parts. Companies like Hightop, Vote, Shantui etc. make them, and then resellers put their labels on them.

The gas engine machines without pilot controls are warm and loud and aren't as refined as the diesel machines. I would think the price of a Kubota vs. a Rato or B&S gas engine is at least $2K.

Resale value of any of these little chinese excavators is marginal - plan on 50% at least in the first year. If you're buying for eventual resale, get a decent used Kubota, JD, Bobcat, Yanmar etc.

 

[check 6]

I am 82 and like you shoveling is not part of my job title any more I have a kubota 008 mini excavator which weighs 2400 lbs and does very thing I need no cab, biggest thing to remember is its limitations. I took a tree stump out this past summer just too a little longer but much easier then shoveling and swinging an ax and it nettles away in my shed when not in use

 

[John White]

Is there any brand I should stay away from? So far I have narrowed it down to one called a Dig Master DM 200 With a Kubota engine, weight is listed at 3968 lbs $7400 and one called InFront YFE18 3527 lbs at $7875. Its hard to find out who makes them. The tag on the Digmaster says "Shandong Machinery". And both of them have a small sticker or them that say "CM". I see that on dilfferent brands. I see it on Kamron excv. I don't know if the same factory makes them or not. I think alot of co. just slap their own stiker on them when they hit the USA. One that I am looking at has a Briggs engine and the other a Kubota 2 cyl. Which engine would be the best?

 

[Carl_NH]

Hi John,

Just looking at the Digmaster web site - they are a small group and "relabel" them - I would stay away. On the other hand, Infront is a larger group and does most of the assembly and I like the design better too. I also have heard others that have this brand and they make a good machine - Its a Diesel by the specs on their web site - YFE18 Crawler Mini Excavator - China YFE18 Crawler Mini Excavator Manufacturers Factory

Don't get a gas - get a diesel specify the Kubota D902 a 16HP 3 Cylinder Diesel - less noise, less heat, more power.

Also it sounds like you are dealing directly with Infront? Make sure the prices include or are quoted as DDP (Delivered Duty Paid)

 

[mollywheel]

I am thinking about getting a mini excv. I need some comments. I am 84 now and often still holes dug for planting and a ditch dug out sometimes and a shovel is just too hard at my age.So some of you who own a mini or looked at them. Give me your input. First of all I think I would like one with a cab. Though it would be parked inside, still would help keep it clean. Is there enough room to move around inside? How hot does it get inside? I think I would like to get the 1 1/2 ton catagory, next step up from the 1 ton, If I decide the extra expense is worth it. I had a J>D 50 at one time when I was doing small excv. business. Sold it and got a JCB 212 which I still have but keep it in a comercial property and I think it is even too big for reallly small jobs. First of all do any of you have a small excv. with the pilot controls? I think I would like that much better. The J.D. 50 I had , had regular controls and after a few hours I got tired because I am tall and had to work humped over or slide the seat so far forward that my knees hit. Any one have one with pilot controls? I also have a Bobcat tractor 420 and it has a backhoe on it but is a real pain to take off and put back on. Everytime I put the hoe on, then I need my scraper blade and have to change it, get the scraper blade on then I will need the hoe. I am thinking about selling the hoe because it takes up so much room inside my building and I think a mini would fit in the same space with room to spare even, Give me your thoughts.

You mentioned wanting pilot controls and a cab. I'd suggest looking into electric mini excavators. They offer:

• Easy Controls: Smooth, low-effort pilot controls, perfect for less strain.
• Clean Operation: No fumes or mess, great for indoor storage and use.
• Compact Size: Fits easily in storage spaces.

Check out this electric model: My Forklift Electric Mini Excavator. It might be exactly what you're looking for.

Selling your Bobcat backhoe and getting a dedicated mini-excavator will likely save you space and be much more convenient.

Hope this helps!