mobile screener

   / mobile screener
  • Thread Starter
#12  
will be finished in a couple more hours
 

Attachments

  • IM001717.JPG
    IM001717.JPG
    278.9 KB · Views: 516
  • IM001716.JPG
    IM001716.JPG
    279.1 KB · Views: 478
  • IM001715.JPG
    IM001715.JPG
    309.5 KB · Views: 494
  • IM001714.JPG
    IM001714.JPG
    266.1 KB · Views: 544
   / mobile screener #13  
That is a very good build. Thanks for sharing.
 
   / mobile screener #14  
You might want to add some extra longitudinal pipes to the screen, which are hinged on 1 side and on the other side mounted to an eccentric wheel which is to be driven by a hydraulic motor.
They use vibrators on potato diggers, but the amount of vibration they can use is limited by the potato tendency to get bruised.
You stones dont get bruised, so the limiting factor would be the construction itself. You might be able to multiply the capacity of the screen with a vibration device by a factor 3 or 4... ;)
 
   / mobile screener #15  
That is a very cool contraption :D

Hope it works well
 
   / mobile screener
  • Thread Starter
#16  
the screen does reciprocate at the moment by 1/4", i may increase that
 
   / mobile screener #17  
What's your soil type? What kind of soil preparation will you do before picking the rocks, i.e. plow & harrow ? Am wondering how well the solid cutting edge will work. Had you considered a toothed cutting edge, like a rock bucket might have? Nice workmanship. Anxious to see it work. MikeD74T
 

Tractor & Equipment Auctions

Hydraulic Power Unit S/A Towable Pump (A46683)
Hydraulic Power...
2005 Mack CV713 Granite Tri-axle Dump truck (A46683)
2005 Mack CV713...
3pt Finish Mower (A49251)
3pt Finish Mower...
45025 (A48082)
45025 (A48082)
Scraper Blade (A49251)
Scraper Blade (A49251)
Zimmerman 12 Ton Tandem Gear (A49251)
Zimmerman 12 Ton...
 
Top