Tchamp
Silver Member
Received a muffler from Farmall140 (Thank you VERY much Sir)
But the unit would not fit. I had to modify it so i could install it on my 2425, but i think it turned out pretty well. Had to cut muffler off end then shorten the exhaust end about 3 inches, then rotated the muffler down 90 degrees and put a extension pipe on the exhaust tip so it would go out the rear of the machine. I think it turned out very well, and my P.T. Is more quiet than ever before. Seems to run cooler also without that big muffler it had on before.View attachment 754218
But the unit would not fit. I had to modify it so i could install it on my 2425, but i think it turned out pretty well. Had to cut muffler off end then shorten the exhaust end about 3 inches, then rotated the muffler down 90 degrees and put a extension pipe on the exhaust tip so it would go out the rear of the machine. I think it turned out very well, and my P.T. Is more quiet than ever before. Seems to run cooler also without that big muffler it had on before.View attachment 754218
Last edited: