MX5100 at work

   / MX5100 at work
  • Thread Starter
#31  
Yeah I've heard EAB is pretty bad up your way. The camp Property I cut on had a pretty good timber sale last November...probably 400 trees or better. I don't think I'll have to look for another place to cut for a while.
 
   / MX5100 at work #32  
Yeah it is. Really stinks. One of my favorite trees. Time to buy a sawmill and build my barn!
 
   / MX5100 at work
  • Thread Starter
#33  
Yeah I'm gettin ready to do the same thing myself. There was a massive hickory that blew down up there that I hauled in today. 12ft logs and the tractor just barely got the two bottom logs on the trailer. I hate to Jst turn it into firewood so I may make some trim out of the butt log. Like you, I need my own mill!
 
   / MX5100 at work #34  
I'd heard the Waglers were working on getting a Wood-Mizer....

I recently used the RCF2772 to cut about 8 acres at my work.
 

Attachments

  • image-131398687.jpg
    image-131398687.jpg
    701.1 KB · Views: 303
   / MX5100 at work
  • Thread Starter
#35  
They've been talkin about it for years. I don't see it happening. That's a super nice cutter you have there. If I keep getting more bushogging jobs I may trade up to a heavier one like yours.
 
   / MX5100 at work #36  
Yeah it is. Really stinks. One of my favorite trees. Time to buy a sawmill and build my barn!

Better not. It's a slippery slope! Pretty soon you find yourself walking thru the woods looking at trees in terms of 10' sections. When it gets real bad you'll look at a nice straight tall pine and envision bundles of 2x6's. Or when your wife points out a pretty cherry tree you envision the cabinets you could build. :) :)

And stay away from the Woodmizer site!! I warn you!!
Wood-Mizer Portable Sawmills Promotion

They did similar back in 2011 and I'm stuck with:
attachment.php


And then I HAD to get a good 12" planer, and now I'm looking for a jointer. I had only planned to use the lumber rough sawn.

It takes away from seat time!
 

Attachments

  • 8x6SAM_0378.jpg
    8x6SAM_0378.jpg
    440.2 KB · Views: 899
   / MX5100 at work #37  
Haha!

Trust me, I'm already in deep!
 
   / MX5100 at work
  • Thread Starter
#38  
Helped dad dismantle an old truck for parts and skid out a big sugar maple.
 

Attachments

  • image-3604463653.jpg
    image-3604463653.jpg
    648.4 KB · Views: 254
  • image-2364457875.jpg
    image-2364457875.jpg
    737.5 KB · Views: 254
  • image-1168196204.jpg
    image-1168196204.jpg
    829.8 KB · Views: 315
   / MX5100 at work #39  
That's a big sugar maple! Firewood or boards? Primo firewood. Best coaling for a fireplace IMO.
 
   / MX5100 at work
  • Thread Starter
#40  
I think it'll be a little of both. I couldn't turn it all into firewood so I saved out a few logs to have milled into something. Sugar maple mixed with some oak is about the best as far as im concerned for firewood.
 

Tractor & Equipment Auctions

2006 Tusk 500 PG-16 Forklift  3-Stage 188in Lift with Aux Hydraulics (A56436)
2006 Tusk 500...
HUSQVARNA RIDING MOWER 42IN DECK (A56859)
HUSQVARNA RIDING...
LOT: Air Hose Reels, 220 V Cord, Electrical Cords, Hand Tools, 2-Wheel Hand Truck (A59076)
LOT: Air Hose...
2008 DOOSAN G25 GENERATOR (A58216)
2008 DOOSAN G25...
2022 Deere 325G (A57148)
2022 Deere 325G...
Cat 936 936F 938G Forks (A59213)
Cat 936 936F 938G...
 
Top