My BX24 50 hour service.
- Thread starter Singlecoil
- Start date
- Views: 10280
-
- Tags
- kubota bx24
dfkrug
Super Member
- Joined
- Feb 3, 2004
- Messages
- 7,589
- Location
- Santa Cruz Mtns, CA
- Tractor
- 05 Kioti CK30HST w/ Prairie Dog backhoe, XN08 mini-X
My understanding was that the Super-UDT was for tractors
with HST. UDT was for the gear tractors.
with HST. UDT was for the gear tractors.
OP
Singlecoil
Gold Member
- Joined
- Feb 26, 2006
- Messages
- 371
- Location
- Eatonville, Washington
- Tractor
- Kubota BX-24D Cub Cadet LT42e
dfkrug said:
Oh boy, I certainly hope that is not the case.
HomeBrew2
Banned
There's volumes of info on this subject in the archives.
In, brief:
My take from all info is that we "should" be using SUDT in the hydros.
MANY dealers use and recommend just UDT. Mine went so far as to cross ref SUDT to UDT in their computers so that the parts dept. can't even special order it!!!
I go 50 miles out of my way to get my SUDT at another dealer and that dealer says SUDT is about all they sell.
My climate is 100+ (lately 110+) in the summer and can go as low as high teens in the winter.
Cheers!
In, brief:
My take from all info is that we "should" be using SUDT in the hydros.
MANY dealers use and recommend just UDT. Mine went so far as to cross ref SUDT to UDT in their computers so that the parts dept. can't even special order it!!!
I go 50 miles out of my way to get my SUDT at another dealer and that dealer says SUDT is about all they sell.
My climate is 100+ (lately 110+) in the summer and can go as low as high teens in the winter.
Cheers!
NoviceguyInCT
Bronze Member
- Joined
- Feb 8, 2006
- Messages
- 84
- Location
- CT, Litchfield County
- Tractor
- BX24 TLB & old JD 400, JD H140
Anyone know how much the dealer charges for a skid plate/undercarriage plate?
NoviceguyInCT
Bronze Member
- Joined
- Feb 8, 2006
- Messages
- 84
- Location
- CT, Litchfield County
- Tractor
- BX24 TLB & old JD 400, JD H140
Anyone know how much the dealer charges for a skid plate/undercarriage plate? My BX24 is due for the 50hr service. What's the going price for such a service?
gordon21
Veteran Member
What a great story. It's nice that it had a good ending. Maybe your son over heard someone at the NAPA parts counter on one of your multiple visits. I'm busy right now.........
A really good project involves 3 trips to a store and requires a bandage.
Making sure you have all the right sockets and wrenchs before you start a service procedure like this is great advice.
A really good project involves 3 trips to a store and requires a bandage.
Making sure you have all the right sockets and wrenchs before you start a service procedure like this is great advice.
HomeBrew2
Banned
PM member "bird1968" here on TBN, he da BX skidplate, et al, man. Dealers have nothing in that regard.
Cheers!
Cheers!
rosey
Silver Member
Kubota specifies SUDT so that is what I used on my BX...........if the manufacturer specifies it .......there must be a good reason for using it.
lovemywoods
New member
Singlecoil:
Thanks for the original information on the 50 hour service! I just bought the materials I will need at the dealer today. Your article also let me check ahead for the tools I will need. I live fairly far from a NAPA store so you've saved me lots of time.
I did realize that a 1 1/16" socket will work for the 27mm socket. In the larger sizes, the sockets are very close. Mine happens to be a six point socket, so it won't slip or damage the bolt head.
Thanks for the original information on the 50 hour service! I just bought the materials I will need at the dealer today. Your article also let me check ahead for the tools I will need. I live fairly far from a NAPA store so you've saved me lots of time.
I did realize that a 1 1/16" socket will work for the 27mm socket. In the larger sizes, the sockets are very close. Mine happens to be a six point socket, so it won't slip or damage the bolt head.
