My easy FEL hitch

[wdchyd]

http://www.tractorbynet.com/forums/customization/140902-adapting-skidsteer-qa-my-kubota.html

Thanx, great thread on that....Yankee Ingenuity at work..!!

 

[Ductape]

R&R.....You mean ChinaTown.??......I can look out my window and just about see their place from work......Lotta stuff in there.....:thumbsup:

You bet !

 

[Thomas]

Bolted..3/8" flat stock top side of bucket for strength.

 

[tractordog]

I like the underside of the bucket the best.

How do you drill mounting holes though a bucket?

Or I should say it must be a pain to drill

 

[adjusterr]

I needed a ball to move various trailers so I burned a hole through the bottom front edge of my bucket on my Kubota L2250, making sure the hole was large enough to take all size ball bolts, then welded tabs on the nuts so I could hand tighten them enough to move a trailer. Works fine, no cost.

 

[wdchyd]

Bolted..3/8" flat stock top side of bucket for strength.

Nice touch on the checker plate cover....:thumbsup:

 

[wdchyd]

I like the underside of the bucket the best.

How do you drill mounting holes though a bucket?

Or I should say it must be a pain to drill

Hey Tractordog...Nice avatar..!!..We'll have to get together and let the dogs race on the tractors.....:cool2:

 

[Thomas]

wdchyd.
"Nice touch on the checker plate cover...."

Other cover plate..lady bent her head than leg w/arm just wasn't sexy anymore. same ladies you see on mud flaps.

 

[tractordog]

Hey Tractordog...Nice avatar..!!..We'll have to get together and let the dogs race on the tractors.....:cool2:

Ya, you are close by. Have three, the dog in the picture never fails to take a great picture

 

[wdchyd]

wdchyd.
"Nice touch on the checker plate cover...."

Other cover plate..lady bent her head than leg w/arm just wasn't sexy anymore. same ladies you see on mud flaps.

Don't tell me you're gettin' old....:confused2:......You must old, I see you just went over 10,000 posts........:dance1: