Name this mystery part!

[Griffey]

I did some work this weekend and then I ended up finding this bolt and rubber piece in my drive way. I am going to start looking through the owners manual, but I thought maybe I'd check to see if anyone recognized the part here. I attached a picture. Any guess to where it came from?

 

[Griffey]

I did some work this weekend and then I ended up finding this bolt and rubber piece in my drive way. I am going to start looking through the owners manual, but I thought maybe I'd check to see if anyone recognized the part here. I attached a picture. Any guess to where it came from?

 

[Egon]

Check the fenders and cab for a similar type bolt and then go looking for an empty hole. /forums/images/graemlins/grin.gif

Egon

 

[Egon]

Check the fenders and cab for a similar type bolt and then go looking for an empty hole. /forums/images/graemlins/grin.gif

Egon

 

[RonR]

The rubber part appears to be like a vibration damper. If you have cab, I'd look there. Also, maybe radiator mount?????

Good luck.
ron

 

[RonR]

The rubber part appears to be like a vibration damper. If you have cab, I'd look there. Also, maybe radiator mount?????

Good luck.
ron

 

[N80]

</font><font color="blue" class="small">( Also, maybe radiator mount?????)</font>

That was my first thought.

 

[N80]

</font><font color="blue" class="small">( Also, maybe radiator mount?????)</font>

That was my first thought.

 

[pinedawg]

It is a cushion nut and bolt, commonly used by Kubota on sheet metal to metal connections, such as cowlings, hoods, platform, ect.
What did you remove? Sometimes you have to hold them from the back to get them to tighten properly...they are sort of like a compression fitting.

 

[pinedawg]

It is a cushion nut and bolt, commonly used by Kubota on sheet metal to metal connections, such as cowlings, hoods, platform, ect.
What did you remove? Sometimes you have to hold them from the back to get them to tighten properly...they are sort of like a compression fitting.