Need a Recommendation

[not2clever]

Team:

I installed a SpeeCo Post Hole Digger Model 65 on my Mahindra 3016. This is supposed to fit a category 1 or 2 hitch. So, my question is when I attached the boom to the top link, the boom has a larger diameter hole than the top link pin, so there is a bit of vertical "slop" in the set-up. Is there a sleeve that would fit in the holes of boom, so the outside diameter of the sleeve would fit in the boom while the inside diameter would fit my top-link pin?

I am new to this and your help is appreciated.

Thanks,

Dave

 

[smstonypoint]

Dave,

If I am understanding correctly, this is what you are looking for:Category 2 to 1 Top Link Bushing - 0268446 | Tractor Supply Company

Steve

 

[Soundguy]

TSC carries the bushings.

soundguy

 

[not2clever]

Thanks team. The site gave me alot of information of the various bushings and pins I may need in the future.

Dave