Need help ASAP!

   / Need help ASAP! #1  

wksinatl

Bronze Member
Joined
Jun 28, 2005
Messages
56
Location
Atlanta
Tractor
case IH 485
I am replacing a broken lift arm fork (earlier post) on my Case IH 485.
There is a large stainless nut that screws on to the arm. The nut slides up inside of the fork and is threaded on the arm from the top lift.
My question is: does this nut get captured between pin "A" and bolt "B"? Or... does the nut rest against bolt "B" at the bottom and slides up to a "stop" inside the fork itself?

It will fit captured between the A and B but will NOT go past the bolt all the way the inside of the fork to the "stop".

This should have been a simple job and has driven me NUTZ. I should have paid more attention to how is was together.

HELP ME OUT GUYS!!!
 

Attachments

  • 740402-Lift Arm 3 (Small).jpg
    740402-Lift Arm 3 (Small).jpg
    37.7 KB · Views: 405
   / Need help ASAP! #2  
I'm looking at my parts book, and assume you're talking about the lift link that doesn't have the crank handle? The book doesn't show where the nut is captured. The owner's manual says that the lower arms should be level when the left link (the one you are working on) is one thread away from it's shortest length and the right link ( with the crank) has the groove in the shaft at the top of the yoke housing. Maybe you could position the nut in both positions and see if one way lines up correctly.
 
   / Need help ASAP!
  • Thread Starter
#3  
geneP,
Yes it is the left side. I got an answer from a local tractor guy. It is captured betwen the bolt and the pin. Otherwise it would have about 3"-5" of up and down slop in it before it actually started to raise the lift arm.
 

Tractor & Equipment Auctions

2022 FREIGHTLINER M2 24FT BOX TRUCK (A51222)
2022 FREIGHTLINER...
1996 Chevrolet IMPALA SS (A51222)
1996 Chevrolet...
2018 DODGE RAM 2500 (A50854)
2018 DODGE RAM...
2013 KENWORTH T370 DUMP TRUCK (A51406)
2013 KENWORTH T370...
2020 Cat 299D3XE Skidloader (RIDE AND DRIVE) (A50774)
2020 Cat 299D3XE...
2019 INTERNATIONAL LT625 TANDEM AXLE SLEEPER TRUCK (A51222)
2019 INTERNATIONAL...
 
Top