You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
New Farmall 100
- Thread starter banjobj
- Start date
- Views: 4536
-
- Tags
- farmall 100
http://share.shutterfly.com/osi.jsp?i=EeAN3DVk2bNWzg4
Try this I hope it works. /forums/images/graemlins/smile.gif /forums/images/graemlins/smile.gif /forums/images/graemlins/smile.gif
Try this I hope it works. /forums/images/graemlins/smile.gif /forums/images/graemlins/smile.gif /forums/images/graemlins/smile.gif
RobertN
Super Member
Cool!
Have you tried hand cranking it yet? It is always fun seeing peoples reaction when you get the handle out and fire it up!
Have you tried hand cranking it yet? It is always fun seeing peoples reaction when you get the handle out and fire it up!
upgw
Gold Member
- Joined
- Oct 19, 2001
- Messages
- 336
- Location
- SE PA
- Tractor
- 2001 Kubota BX2200, 2011 Hustler Super Z 31 Kawi
I don't have a crank for my 130, and the hole through the front is obstructed by the tin on the front, were the 130's not meant to be cranked? Somehow I suspect with the 'high' compression ratio (6.7:1 I think) and the oversize pistons and sleeves used for the rebuild (so I don't know what the actual ratio or displacement is) it would probably be pretty hard to hand crank. The 6V starter certainly has its work cut out for it.
- Patrick
- Patrick
Wow, seeing that beauty brings a tear to my eye. Brother to my Farmall 100. What serial number is yours by the way, my serial is 1666 which apparently is a 1954. It would be cool if they were the same year of production.
I am looking to find a handcrank, just to try it out for fun. There is a salvage yard here in NC that says that have some.
So is your a 6v or 12v conversion?
Ramon
I am looking to find a handcrank, just to try it out for fun. There is a salvage yard here in NC that says that have some.
So is your a 6v or 12v conversion?
Ramon
Hey, I noticed that you had a Sickle Bar mower mounted at the same time as the Fast Hitch. Can the Fast Hitch operate normally with the Sickle bar mower mounted? On mine I have an additional arm running from the front of the FH Bar to the right front hydraulic rockshaft which I don't see on your tractor. I am curious because I would like to get a sickle bar mower for cutting hay but my first option was trying to find a Fast Hitch Sickly Bar mower.
Ramon
Ramon
