New Holland 545D
- Thread starter LeoJmnzzz
- Start date
- Views: 140
-
- Tags
- new new holland
Harry in Ky
Veteran Member
Probably a tool box.
sd455dan
Super Member
- Joined
- Oct 23, 2012
- Messages
- 6,272
- Location
- North Idaho
- Tractor
- Rhino 554, Ford 550 TLB (JD X500, MTD, Gilson riding mowers) Ford 3000-Sold
Double fuel filter assembly?
TractorTech
Elite Member
- Joined
- Jan 26, 2012
- Messages
- 2,966
- Location
- California
- Tractor
- Ford 7710, Ford 550, Ford 1910, Ford 4430, KD Forklift, Ford LGT17H, New Holland L255 Skidsteer
Welcome to TBN!
I guess you are talking about the big plastic boss at the bottom of the tank. That is where the fuel valve goes (I don't see it), but it is the low point of the tank. Never tried to take the large plug out of the tank though. Outlet valve is mounted on a plate that is bolted to that.
Last year of the D-Series skiploaders. 8x8 with PTO. Emissionized engine. Grease the rear pivot of the front axle as dirt can get in there, cause oil to leak out and ruin the reversing box gears (box that it part of the pivot on the front axle). Expensive to fix.
I guess you are talking about the big plastic boss at the bottom of the tank. That is where the fuel valve goes (I don't see it), but it is the low point of the tank. Never tried to take the large plug out of the tank though. Outlet valve is mounted on a plate that is bolted to that.
Last year of the D-Series skiploaders. 8x8 with PTO. Emissionized engine. Grease the rear pivot of the front axle as dirt can get in there, cause oil to leak out and ruin the reversing box gears (box that it part of the pivot on the front axle). Expensive to fix.
