New Kubota M5040 - Can not re-connect Hydrulics

[spigadgetman]

Help - I have a bran new Kubota M5040. I removed the front loader (easy) 4 hydraulic dis-connects and 2 pins. The only trick of course is to relieve pressure on the hydraulics before disconnecting. THe problem I am having is getting it re-connected. Pressure is relieved and quick disconnect goes on 98% of the way but lacks 1/16 inch or so for the quick disconnect to seat and lock. I just can not seem to get the connection pushed on that last bit to latch. All four connections act the same. Is there any trick or do I need to get just get serious with some leverage. I can't believe it is this hard.
Thanks

 

[spigadgetman]

Help - I have a bran new Kubota M5040. I removed the front loader (easy) 4 hydraulic dis-connects and 2 pins. The only trick of course is to relieve pressure on the hydraulics before disconnecting. THe problem I am having is getting it re-connected. Pressure is relieved and quick disconnect goes on 98% of the way but lacks 1/16 inch or so for the quick disconnect to seat and lock. I just can not seem to get the connection pushed on that last bit to latch. All four connections act the same. Is there any trick or do I need to get just get serious with some leverage. I can't believe it is this hard.
Thanks

 

[PineRidge]

Take the male ends of the quick connects and tap them with a hard object after wrapping them first with a rag. It will eliminate built up pressures within the FEL and then attachment will be easy.

This is a common problem with hydraulics left out in the sun.

 

[PineRidge]

Take the male ends of the quick connects and tap them with a hard object after wrapping them first with a rag. It will eliminate built up pressures within the FEL and then attachment will be easy.

This is a common problem with hydraulics left out in the sun.

 

[Bob_Skurka]

Also, it helps if you "cycle" the loader lever and work all the levers before you reconnect the hoses. Just like when you took them off, do it before you put them back on.

 

[Bob_Skurka]

Also, it helps if you "cycle" the loader lever and work all the levers before you reconnect the hoses. Just like when you took them off, do it before you put them back on.

 

[Billy_S]

Your tractor is now junk. Ruined beyond all possibility of repair. Give me your address and I will come haul it off for ya. /forums/images/graemlins/smirk.gif

Or maybe try what Mike said.

 

[Billy_S]

Your tractor is now junk. Ruined beyond all possibility of repair. Give me your address and I will come haul it off for ya. /forums/images/graemlins/smirk.gif

Or maybe try what Mike said.

 

[Doc_Bob]

</font><font color="blue" class="small">( Take the male ends of the quick connects and tap them with a hard object after wrapping them first with a rag. It will eliminate built up pressures within the FEL and then attachment will be easy.

This is a common problem with hydraulics left out in the sun. )</font>

Why is it always the male member who has to get rapped on the whatever ? /forums/images/graemlins/grin.gif Where is equality?

 

[Doc_Bob]

</font><font color="blue" class="small">( Take the male ends of the quick connects and tap them with a hard object after wrapping them first with a rag. It will eliminate built up pressures within the FEL and then attachment will be easy.

This is a common problem with hydraulics left out in the sun. )</font>

Why is it always the male member who has to get rapped on the whatever ? /forums/images/graemlins/grin.gif Where is equality?

 

[riptides]

</font><font color="blue" class="small">( Your tractor is now junk. Ruined beyond all possibility of repair. Give me your address and I will come haul it off for ya. )</font>

Yep. I cannot believe this person comes here with a problem like this without giving US the benefit of his purchasing thoughts.

/forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif

I mean really, some of us are drooling on and over the limited sighting of the new M series, and this person has one.

Whatever happened to the intro posts, the kicking the tires post, the infinite thinking about blah.blah.blah and blah posts.

I feel, unworthy and used. /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif

Welcome aboard and relieve the pressure and try the connect again.


/forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif
-Mike Z.

 

[riptides]

</font><font color="blue" class="small">( Your tractor is now junk. Ruined beyond all possibility of repair. Give me your address and I will come haul it off for ya. )</font>

Yep. I cannot believe this person comes here with a problem like this without giving US the benefit of his purchasing thoughts.

/forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif

I mean really, some of us are drooling on and over the limited sighting of the new M series, and this person has one.

Whatever happened to the intro posts, the kicking the tires post, the infinite thinking about blah.blah.blah and blah posts.

I feel, unworthy and used. /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif

Welcome aboard and relieve the pressure and try the connect again.


/forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif
-Mike Z.

 

[Doc_Bob]

</font><font color="blue" class="small">( Help - I have a bran new Kubota M5040. I removed the front loader (easy) 4 hydraulic dis-connects and 2 pins. The only trick of course is to relieve pressure on the hydraulics before disconnecting. THe problem I am having is getting it re-connected. Pressure is relieved and quick disconnect goes on 98% of the way but lacks 1/16 inch or so for the quick disconnect to seat and lock. I just can not seem to get the connection pushed on that last bit to latch. All four connections act the same. Is there any trick or do I need to get just get serious with some leverage. I can't believe it is this hard.
Thanks
)</font>

No pictures, no help! /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif
Bob

 

[Doc_Bob]

</font><font color="blue" class="small">( Help - I have a bran new Kubota M5040. I removed the front loader (easy) 4 hydraulic dis-connects and 2 pins. The only trick of course is to relieve pressure on the hydraulics before disconnecting. THe problem I am having is getting it re-connected. Pressure is relieved and quick disconnect goes on 98% of the way but lacks 1/16 inch or so for the quick disconnect to seat and lock. I just can not seem to get the connection pushed on that last bit to latch. All four connections act the same. Is there any trick or do I need to get just get serious with some leverage. I can't believe it is this hard.
Thanks
)</font>

No pictures, no help! /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif
Bob

 

[SCDolphin]

Drop Dead Gorgeous. How did you pick the M5040 vs GL 4630 or 5030???

 

[SCDolphin]

Drop Dead Gorgeous. How did you pick the M5040 vs GL 4630 or 5030???