New to hydraulics

[C4Ranch]

The grease is used to hold the oring in place. Don't matter what u use as the little bit won't matter. As long as u lubed them and they stayed in place you'll be fine.

 

[buckeyefarmer]

Install went well, no leaks afterwards, so successful. :laughing: Just had to remove the seat, which was easy. Did not have to take off tire.

Here's the valves installed under the seat.


One of the valves with the o rings installed in the slot.


The valves all bolted together.


The parts as they came.



Back view before hoses attached.

 

[dantran1010]

The BH return line should go to a return line or directly to tank.

So I also have a L5030 with rear ports for my backhoe attachment which I am guessing is a power beyond setup? If the hoe is not attached I have to connect the supply line back into the return line. Since these are already back there is there a way to connect to them for both another set of rear remotes from the cab as well as another function on the hoe such as a hydraulic grapple etc...?