new to tractors, thinking about a powertrac...
- Thread starter dukenyc
- Start date
- Views: 6264
Charlie_Iliff
Veteran Member
- Joined
- Jun 13, 2001
- Messages
- 1,890
- Location
- Arnold, MD
- Tractor
- Power Trac PT1845, John Deere 2240, John Deere 950, John Deere 755, Jacobsen Turf Cat II
I think I have a solution based on the pictures. Invite someone on the forum with each size machine to come live on your place - then you won't have to buy a tractor after all. /forums/images/graemlins/grin.gif
There are some Connecticut and NY owners. If possible, visit a few and try out the PTs.
There are some Connecticut and NY owners. If possible, visit a few and try out the PTs.
RegL
Platinum Member
dukenyc, I'm located in Northwest corner of Ct., probably on your way to NY property. Your welcome to try out my 1430 as long as you don't mind looking at a dirty one.
pequeajim
Platinum Member
You have a very nice looking property!
I agree. There are enough PT owners up your way to go and try one out. That's what I did and it really made up my mind.
I really think that the 1845 would be the ticket for you. Remember that (I think) it already comes with the 72" finish cut deck, so that makes it around the same price as a 1445 or maybe even cheaper. And it is smaller than the 1445.
I don't know if you have anything that the 425 can't handle, it will just take longer.
Check these guys out:
Connecticut
1430 REGL
425 PTRICH
New York
422 SCARG
1845 SEDGEWOOD
422 NEWYORKTRAC
New Hampshire
425 POWERTROM 425
New Jersey
422 NJBILL
2422 LITTLEALICE01
Contact the ones that you want to try out. You will notice that there are 425, 1430 and 1845 owners in there.
I agree. There are enough PT owners up your way to go and try one out. That's what I did and it really made up my mind.
I really think that the 1845 would be the ticket for you. Remember that (I think) it already comes with the 72" finish cut deck, so that makes it around the same price as a 1445 or maybe even cheaper. And it is smaller than the 1445.
I don't know if you have anything that the 425 can't handle, it will just take longer.
Check these guys out:
Connecticut
1430 REGL
425 PTRICH
New York
422 SCARG
1845 SEDGEWOOD
422 NEWYORKTRAC
New Hampshire
425 POWERTROM 425
New Jersey
422 NJBILL
2422 LITTLEALICE01
Contact the ones that you want to try out. You will notice that there are 425, 1430 and 1845 owners in there.
Rip
Platinum Member
The PT model lineup can be a bit confusing at first. Note that in the diesel models the 1*** series is the Low Profile series where the operator sits down in front of the engine. The 2*** series has the operator sitting above the engine and has an optional true back-hoe (not mini-hoe) available that mounts/dismounts quickly to the rear of the machine.
If the immage of the "1445" you are looking at seems to place the operator up fairly high, you may be looking at a 2445 instead. While any of the 4** gas or 1*** diesel series will be quite stable on hills compared to any CUT, the 18** slope mower series are the ultra-low profile machines rated for the steepest terrain.
By all means take advantage of any and all invitations to actually look at and test drive the various models. You will understand and appreciate the differences much better than pictures or specs alone.
Keep in mind that an articulated machine takes a bit of getting used to, but once you get the "hang" of how to manouver it to best advantage it is hard to accept anything else.
From the pictures of your new place, I think you would be happier in the long run with one of the larger models versus the smaller ones.
If the immage of the "1445" you are looking at seems to place the operator up fairly high, you may be looking at a 2445 instead. While any of the 4** gas or 1*** diesel series will be quite stable on hills compared to any CUT, the 18** slope mower series are the ultra-low profile machines rated for the steepest terrain.
By all means take advantage of any and all invitations to actually look at and test drive the various models. You will understand and appreciate the differences much better than pictures or specs alone.
Keep in mind that an articulated machine takes a bit of getting used to, but once you get the "hang" of how to manouver it to best advantage it is hard to accept anything else.
From the pictures of your new place, I think you would be happier in the long run with one of the larger models versus the smaller ones.
Schultz
Gold Member
regarding the same mower size for the 425 and the 1430. I have an old price sheet that also has a 72" mower listed for the 1430. If your're interested in that I suppose you ask if it's still available for the 1430's
Thank for the replies. I really love this property, and I can't wait to move. I have only been there in the winter, and I have only a few pics from the summer.
Regl, I'll take you up on that offer, If it wasn't dirty, I am not sure if it it would be worth seeing. What part of CT are you in? I am in New Haven.
So, how steep do you think that back hill is? Is it 30deg, more? Will a 425 do the job?
The advantages of a small unit for me are: easier to store until I build a dedicated shed, easier to move around the trees, lighter, so easier to deal with if it gets stuck or breaks down.
The larger machines: more capable, faster at mowing (especially if the larger deck fits the 1430).
As a side note, I know alot more about gas engines than diesel.
I don't want to take all day to cut the grass, and I would like to periodically (once a month or so) clear a shooting range and a few paths through woods and along the pond. The FEl I'll use to transport firewood and other items. I am sure I'll do more in the future.
The only reason that I am in a bit of a hurry now is that I have to start maintaing the property April 1st.
Only one month to make the right pick!
I really appreciate any input.
Regl, I'll take you up on that offer, If it wasn't dirty, I am not sure if it it would be worth seeing. What part of CT are you in? I am in New Haven.
So, how steep do you think that back hill is? Is it 30deg, more? Will a 425 do the job?
The advantages of a small unit for me are: easier to store until I build a dedicated shed, easier to move around the trees, lighter, so easier to deal with if it gets stuck or breaks down.
The larger machines: more capable, faster at mowing (especially if the larger deck fits the 1430).
As a side note, I know alot more about gas engines than diesel.
I don't want to take all day to cut the grass, and I would like to periodically (once a month or so) clear a shooting range and a few paths through woods and along the pond. The FEl I'll use to transport firewood and other items. I am sure I'll do more in the future.
The only reason that I am in a bit of a hurry now is that I have to start maintaing the property April 1st.
Only one month to make the right pick!
I really appreciate any input.
