OP
ruglad03835
Silver Member
Do you by chance have any other pictures of this setup? I kind of like the direction you went in. I'm concerned about shock and vibration on the loader arms with a FEL plow.
New Tractor
- Thread starter ruglad03835
- Start date
- Views: 1620
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 23,144
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
Isn't that picture of Trev's tractor from a year or so ago?
I thought that plow was OEM Deere...
I thought that plow was OEM Deere...
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,537
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
The OEM Deere plow is black (this is a 7' Western Plow) and is 6' I believe.
The one shown is one I put together.
I will dig around in the archives for the quick attach pics I fabricated and posted some time ago. If I don't find them, I will post again, but don't want to load duplicates if not necessary. A couple of TBN members have made something similar, and one I remember was an improvement over mine.
Here is a thread showing a Meyer plow attachment.
Meyer Plow
The one shown is one I put together.
I will dig around in the archives for the quick attach pics I fabricated and posted some time ago. If I don't find them, I will post again, but don't want to load duplicates if not necessary. A couple of TBN members have made something similar, and one I remember was an improvement over mine.
Here is a thread showing a Meyer plow attachment.
Meyer Plow
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,537
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
OP
ruglad03835
Silver Member
It's here. The tractor arrived at 0830 today. One of the dealerships mechanics delivered it. He went over the tractor and showed me how to disconnect the loader. As soon as he left I went out back and pushed up my mulch pile. As soon as I got done with that I went back to my live fire drill. We got to train in an old house then burn it to the ground. We were almost done with that when one end of the house fell into the driveway in and blocked 1 engine in the driveway. So I just had to go and get the tractor and push the debris aside and clear out the driveway. Next the Chief asked if I could pull over the chimney for him. We wrapped a chain around the base of the chimney and I set the tractor in 4wheel drive, stepped on the rear diff. locks and pulled the chimney down. I'll post pictures of the tractor tomorrow
