Nuts?

[cdaigle430]

Found this in my yard but I know its from my GC2410. Is this end supposed to have a nut?

It just came off by itself.

 

[Diggin It]

Part of your rear three point .... one of the stabilizers. That end should go ito a turnbuckle.

 

[Thomas]

I've seen some turnbuckle check nuts on both sides of turnbuckles

 

[JWR]

Found this in my yard but I know its from my GC2410. Is this end supposed to have a nut?

It just came off by itself.View attachment 750138

Post a picture of the rear end of your GC. It should be easy to see where it is missing.

 

[cdaigle430]

The BH is mounted but yes I do see where it goes. Was wondering if that side of the turmbuckle also had a nut like the topside of the turnbuckle does.

I noticed the ones they sell at The Tractor Supply store do not.

 

[LS Tractor Owner]

No, it will just have the nut on one side.

 

[DMW]

No nut, looks like its the lift arm height adjustment for the right side 3pt arm.

 

[Dmacleo]

bottom end of turnbuckle, no nut. top side has nut.
hey since it was just laying on ground mail it to me...been considering making mine turnbuckle left and right, removing top nut, gaining 1.5 inches lift height.
just saying....it was laying there on the ground

 

[ROUSTABOUT]

Nuts are on RH threads.

 

[PILOON]

Nuts are on RH threads.

Probably as RH is very common vs LH that might be special, hence more costly.
Shucks just price a LH tap and you'll understand.