new jersey mike
Silver Member
- Joined
- Apr 22, 2009
- Messages
- 130
- Tractor
- 2010 - NH T1530
I have noticed if I back up and mow and I am in saplings they will rip off the rubber guard on the front. So I have added a series of over sized washers to each bolt, currently I thing the largest is 3 inches with a 1 inch to hold it on.
Also the deck tilt as you know you want the back end an inch or so higher so the bulk can exit if the deck is tilted higher in the front I would suspect more debris would fly out forward. The only issue is when you raise the pto a couple of inches if the wheel is not off the ground you can be creating an incorrect tilt.
Also the deck tilt as you know you want the back end an inch or so higher so the bulk can exit if the deck is tilted higher in the front I would suspect more debris would fly out forward. The only issue is when you raise the pto a couple of inches if the wheel is not off the ground you can be creating an incorrect tilt.