Options for 3rd Function on RX7320

95ram · Jun 9, 2016

WesternMN said:
I'm picking up an RX7320 and I'd like to add 3rd function. I'm getting an price from the dealer and considering DIY as well if it isn't too complicated. Any recommendations on the best route to take?

I need to see what happens with this. I'm going to be needing one for my NX5010 for a small square bale grapple. And I've been looking at a PX9020 which will need one. I've talked with MtnViewRancher on the phone. He seems like a pretty straight shooter.

countrybumpkin · Jun 9, 2016

Myself along with a few others have done a DIY on our NXs , they turned out real well. As for MntviewRanch , Brian is very reputable and will stand behind his stuff, also all his products are quality parts not cheap stuff marked up to make a good profit.

panampefa · Feb 23, 2025

Do any RX7320/KL7320 owners out there have any images of their OEM (RXA111) 3rd function valve kit installed on their tractor that you could share? I have a 2018 Kioti RX7320 that I'd like to see how everything looks installed.

J&K · Feb 24, 2025

panampefa said:
Do any RX7320/KL7320 owners out there have any images of their OEM (RXA111) 3rd function valve kit installed on their tractor that you could share? I have a 2018 Kioti RX7320 that I'd like to see how everything looks installed.

I can take some pics when I get out to the shop later this morning

J&K · Feb 24, 2025

Need more let me know.

panampefa · Feb 28, 2025

J&K said:
Need more let me know.

Thx J&K..
Did you have to drill the 2 bold holes for the valve bracket in the loader structure or was yours alreay pre-drilled from the factory. I have a 2018 model and the holes are not there. Also did you utilize any existing bracket mounts further toward the front of the loader where the hydraulic couplings are mounted (on the cross-member shield of the front of the loader)?

J&K · Mar 1, 2025

panampefa said:
Thx J&K..
Did you have to drill the 2 bold holes for the valve bracket in the loader structure or was yours alreay pre-drilled from the factory. I have a 2018 model and the holes are not there. Also did you utilize any existing bracket mounts further toward the front of the loader where the hydraulic couplings are mounted (on the cross-member shield of the front of the loader)?

Dealer installed when I ordered tractor. I believe the RX now are all prepped for 3rd function now and holes are already there.

panampefa · Mar 1, 2025

J&K said:
Dealer installed when I ordered tractor. I believe the RX now are all prepped for 3rd function now and holes are already there.

Correct J&K... the holes are there now on new and recent models ... I own a 2018 so I have to drill my own.

panampefa · Mar 2, 2025

panampefa said:
Thx J&K..
Did you have to drill the 2 bold holes for the valve bracket in the loader structure or was yours alreay pre-drilled from the factory. I have a 2018 model and the holes are not there. Also did you utilize any existing bracket mounts further toward the front of the loader where the hydraulic couplings are mounted (on the cross-member shield of the front of the loader)?

J&K ... is it possible you could take images of how the pathway of wiring harness from the joystick to the solenoids is laid out? The RXA-111 installation instructions are not at all accurate or relative to US based tractors.

J&K · Mar 3, 2025

panampefa said:
J&K ... is it possible you could take images of how the pathway of wiring harness from the joystick to the solenoids is laid out? The RXA-111 installation instructions are not at all accurate or relative to US based tractors.

I try to in the next couple days.