Pallet Fork Question

[UPS Nick]

Yes I'll check them out also...........

 

[UPS Nick]

I just checked these Artillian forks out---nice if you have a John Deere but I have a Kioti and need a pin style maybe with adujustable brackets that slide right to left to get my 40" I need. Would be nice to find a Quick attachment for the pin style. I see Kioti makes one for about $400 but not sure if it will work on mine.........

 

[C-Range]

I just checked these Artillian forks out---nice if you have a John Deere but I have a Kioti and need a pin style maybe with adujustable brackets that slide right to left to get my 40" I need. Would be nice to find a Quick attachment for the pin style. I see Kioti makes one for about $400 but not sure if it will work on mine.........

Nick, for your machine the Artillian Pin-On frame may work. The design has some flexibility in dimensions during manufacture. Finding out if it can be made to work would just require a few measurements from you. No expectations, just thought I'd mention it.

 

[tessiers]

I have a set of frontier forks, they are welded tubes, not bent or solid. They cost $750 when we bought the tractor. I run extending boom forklifts all the time at work and I assure you floating forks are quite capable of dumping. They are better for un even loading situations, and can be chained down to prevent floating if needed. I don't believe that 300x loader will lift much over 1000 lbs, and by the looks you will never hurt those forks. I would buy them in a minute if I needed a set, only thing I see wrong is the looks. Of course I am a farmer and I put function over form.