Pallet Forks

[Soapandbacon]

One of the things that i wanted to get for my BX was a set of pallet forks, I have the quick attach option which makes it even more desirable, however the OEM Kubota frame and forks are in the ozone! so far i have not found any aftermarket ones..... and then i saw these on eBay http://r.ebay.com/oi6jRG

not a lot of detail, i asked for more and am still waiting, what do you guys think ?

 

[George2615]

What questions do you have. The ad says they fit the BX.
Is your Kubota QA a special QA or is it the same as a skid steer QA.
If it's the SSQA then these forks from Titan will work.

42" Pallet Fork Attachment Tractor Forks Kubota Holland Skid Steer Quick Tach | eBay

 

[Industrial Toys]

Fork carriers arn't hard to make. It's probably getting harder for liability reasons, but many guys get their forks as condemned ones from Lift Truck companies. A little bit of weld or a hole drilled and the froks MUST be replaced for certification. Getting smaller ones is usually harder.

I even scored a whole carriage with hydraulically adjustable fork spacing for Peanuts!

My loaders seem to have forks mounted more often then a bucket!

 

[Soapandbacon]

I have the new Kubota quick attach system, I'm just wondering if this is a good price or if you see anything that i should ask the seller about since there does not seem to be much info. It looks good but doesn't really specify anything. Thanks guys p.s. i just ordered the quick attach bucket hooks form bxpanded!

 

[Jbuice123]

Check out
mytractortools.com

 

[mfridenmaker]

What questions do you have. The ad says they fit the BX. Is your Kubota QA a special QA or is it the same as a skid steer QA. If it's the SSQA then these forks from Titan will work. 42" Pallet Fork Attachment Tractor Forks Kubota Holland Skid Steer Quick Tach | eBay

I have these Titan forks and couldn't be happier. Great value.

Mark

 

[JJZ 109]

i saw these on eBay http://r.ebay.com/oi6jRG

not a lot of detail, i asked for more and am still waiting, what do you guys think ?

I think that's a lot of money for not a lot of fork. That's about what I paid for a set of Bradco 4 foot/4,000 pound forks for my skid steer from a local truck/heavy equipment dealer.

 

[Underdog57]

I have the Titan Forks and are very happy with them.

 

[jrclark]

I bought Titan forks and could not more displeased. The gap on the SSQA mount measured 7/8". That's not insignificant. Titan orders container quantities from China, then turns them over in the US with zero quality control. You absolutely get what you pay for when choosing companies like this. Anyone who's had a positive sale, I consider you lucky.

I can afford to buy tractor parts sourced from America/Japan/S Korea, and will do so from now on.