Part Help TZ22DA

   / Part Help TZ22DA #1  

Desert Sands

New member
Joined
Jun 25, 2024
Messages
7
Tractor
NH TZ22DA
Does anyone know what this ground wire is for and the bolt necessary to secure it onto the nut? It sits under the air canister. Since there appears to be an opening that descends down through the nut, I am hesitant to use a bolt that would secure the wire to it completely capping it off. I have been unable to locate the part on any parts diagrams for this tractor. Dirt bikes and old VW 6 volt vans I'm fairly savvy on but this animal is a new breed for me. 🥴
IMG_1922.jpg
IMG_1924.jpg
 
   / Part Help TZ22DA #2  
That looks like some sort of sensor to me. Water temp maybe. It's hard to tell with the harness in the way.
 
   / Part Help TZ22DA #3  
E
That looks like some sort of sensor to me. Water temp maybe. It's hard to tell with the harness in the way.
Not sure if these engines have them - but that looks a lot like the “knock” sensor on my old Nissan Ka24
 

Tractor & Equipment Auctions

2025 Kivel 48in Forks and Frame Tractor Attachment (A44571)
2025 Kivel 48in...
Adams 5 ton Fertilizer Buggy / Wagon (A48561)
Adams 5 ton...
2019 Freightliner TMA (A45336)
2019 Freightliner...
2015 Ford F-750 Terex Hi-Ranger 5TC-55 55ft Insulated Bucket Truck (A46683)
2015 Ford F-750...
2000 John Deere 1860, 30ft Wide, Gandy Box, Wing Fold, 7.5in Spacing (A48561)
2000 John Deere...
2014 Ford F-550 IMT 7500-30 7,500LBS Crane Service Truck (A46683)
2014 Ford F-550...
 
Top