patching a tube ?

/ patching a tube ? #1  

firemanpat2910

Platinum Member
Joined
Feb 10, 2006
Messages
917
Location
Havana Fla
Tractor
Ford 2910II
I had to take the tractor in to get a rear tire fixed. less than180 hours a new Massey 50 hp. had a peice of ground wire off a power pole stuck in it. tire was water filled and I dont mind the repair charge, but was wondering, the shop didnt even look at the tube to see if it was fixable, said the patch wouldnt work on a wet tube. @ 49 bucks for a tube, I wonder if anyone has experienced patches not working because of water? like i said over all not as bad as it could have been. I took them the tractor, repair was done while I waited. so $100.00 bucks, a few hours of time spent. Oh and I took my pops into town with me, so that cost me a breakfast bill :)

and on the plus side, after watching them do the repair, I might go price a set of tire spoons.
 
/ patching a tube ? #2  
You need to find a new tire place! I patch mine that have had water in them. Its a bit time consuming to get enough water out to remove the tube from the tire but after that its just like fixing a dry tube. Im guessing they probaly cut it with a pocket knife to let the water out for removal to save time, i have been tempted to do this myself.
 
/ patching a tube ? #3  
I have seen wet tubes patched and have patched several myself. I would say they probably didn't want to take the time to do the work and just sell you a new tube. Could also be if they patched they might not have stood behind their work. But for a tractor with less than 180 hours tube should be like new. By the time the shop took the time to patch your tube you were probably cheaper buying a new one.
 

Marketplace Items

2019 CHEVROLET SILVERADO CREW CAB TRUCK (A63276)
2019 CHEVROLET...
2017 TOYOTA TUNDRA(INOPERABLE) (A63569)
2017 TOYOTA...
2011 Ford F750 Dump Truck (A62613)
2011 Ford F750...
ATLAS DRILL PRESS (A63569)
ATLAS DRILL PRESS...
2007 MACK CTP713 TRI AXLE DUMP TRUCK (A59575)
2007 MACK CTP713...
Poly Machine & Parts (A64047)
Poly Machine &...
 
Top