Dirt Moving PHD on front

   / PHD on front
  • Thread Starter
#11  
Tom H.
Thanks for the reply, the specs on my B26 is 11.2 gpm and I have come up with a way to mount it to the middle of my bucket and if that does not work I have have a quick connect bucket so I can remove the bucket if I have to. so I need to figure out what hyd. motor I will need and get the part number for the remote to put on the tractor. thanks again
 
   / PHD on front #12  
The local Kubota Dealer said he had set up b26's with a backhoe mounted Hydraulic Post Hole Digger for a local landscape company...

Made it easier to reach hard to get to places and the thumb hydraulics were used to power the auger.
 
   / PHD on front
  • Thread Starter
#13  
had not thought of that, that is why I like this site. great idea got me to thinking now. yea I know I'm going to have a headache
 
   / PHD on front #14  
   / PHD on front #15  
Ultrarunner

Good point about the PHD on the hoe. A hydraulic PHD mounted in the middle does not let you see the tip when setting it down. I still think 11 gpm is marginal to run a hydraulic PHD. What is the hydraulic psi of a B26?
 
   / PHD on front #17  
   / PHD on front
  • Thread Starter
#18  
Radman1, the psi is 2250 to 2400. I like the idea of putting it on the backhoe since that would save dollars and I would not have to add a new valve.
 

Tractor & Equipment Auctions

2010 Ford F-150 4x4 Ext. Cab Pickup Truck (A46684)
2010 Ford F-150...
2002 Ford F-150 4x4 Ext. Cab Pickup Truck (A46684)
2002 Ford F-150...
2024 Kubota RTVX1100C (A46684)
2024 Kubota...
2017 Bobcat E85 Midi Excavator (A46683)
2017 Bobcat E85...
2020 Bobcat E42 (A47307)
2020 Bobcat E42...
3pt Pull Behind Plow (A43476)
3pt Pull Behind...
 
Top