Pictures from a skid steer mowing contractor

[Rustyiron]

Those look like Quadco cutters on your new mulcher.
You should be able to both sharpen them and rotate them 180* for a new edge. Quadco has a distribution center in NC and lots of cutter specs online for when you need them.
On the downside, I ask them how many I do I need for the first quantity discount, 100pc.!
With shipping they were still about $22 ea.
Since then I've been told that Caterpillar has good prices but I have enough for a long time right now.

 

[Lineman North Florida]

Those look like Quadco cutters on your new mulcher.
You should be able to both sharpen them and rotate them 180* for a new edge. Quadco has a distribution center in NC and lots of cutter specs online for when you need them.
On the downside, I ask them how many I do I need for the first quantity discount, 100pc.!
With shipping they were still about $22 ea.
Since then I've been told that Caterpillar has good prices but I have enough for a long time right now.

I haven't looked into them yet, but was told they were readily available through a company out of Canada, but I suspect that you are right and are probably available right here in the US, they are also available through the manufacturer.

 

[Lineman North Florida]

We cut the oats that I planted in December they were pretty tall in most places , it's supposed to be good weather for the next week, let's see how it plays out. Charlie.

 

[BackRoad]

Fingers crossed!

 

[paulsharvey]

Looks dry and mild next 7 days. We did get a short but pretty heavy rain around 8pm last night, nothing severe. Now, Sr26 going into Gainesville from the east side, I think i saw about 15 trees down from that same storm. Also saw reports of hail in Gainesville

 

[Lineman North Florida]

Looks dry and mild next 7 days. We did get a short but pretty heavy rain around 8pm last night, nothing severe. Now, Sr26 going into Gainesville from the east side, I think i saw about 15 trees down from that same storm. Also saw reports of hail in GainesvilleView attachment 3258781

Yep I'm counting on those 7 days to get this dry.

 

[paulsharvey]

You are running a haybine, with the crimper rollers, right, not a disc mower? Just thinking of stem thickness vs dry time,

 

[Lineman North Florida]

You are running a haybine, with the crimper rollers, right, not a disc mower? Just thinking of stem thickness vs dry time,

Mower/Conditioner is what we use, would have rather cut them with just a straight disc mower, but you use what you have.

 

[Lineman North Florida]

I put the oats up in windows today, they are drying really well getting them flipped today should help get everything that was on the bottom up to the sun to finish the drying process.

 

[Carl_NH]

So you windrow two into one or three into one? That looks like good food there!

Another day and it's ready to bale?