pictures

   / pictures #1  

mroldstyle

Silver Member
Joined
Dec 8, 2009
Messages
113
Location
cataract wi
Tractor
2003 New Holland tc 29d
Started building a brush grapple and was about to post some pics, but cant find any info on how to post pics any help. Keep it simple I'm not to good with a computer:D
 
   / pictures #2  
When you reply or post in this box just down below you will see "manage attachment" click on that and you can brouse your pics to see which ones you want to post.
Good luck and cant wait to see them.
Jeremy
 
   / pictures
  • Thread Starter
#3  
grapple 003.jpg

grapple 004.jpg

Thanks for the quick reply, now lets see if it worked!
 
   / pictures #4  
Looks like a great start!!! :thumbsup: Looking forward to the finished grapple...
 
   / pictures
  • Thread Starter
#5  
Got the back finished last night, its similar to the bottom 3/8 x 3 1/2 flat steel with 1" round bar for stabilizer. Didn't have chance to take pics. Now waiting for plasma cutter to be delivered (hopefully Monday) so I can cut out the grapples. Might take a day or two to get plasma up and running, need to get a dryer plumbed into compressor and practice a little!
 
   / pictures #6  
IMG_0113 (816 x 612).jpgforks w lift arm.jpgthis was a TEST too see if posting a picture would work pardon the intrusion.
 

Tractor & Equipment Auctions

CATERPILLAR HYD HAMMER (A52707)
CATERPILLAR HYD...
MISC CABINETS FLOORING (A54757)
MISC CABINETS...
2000 WINNEBAGO FORD F550 RV (A52472)
2000 WINNEBAGO...
1840 (A51248)
1840 (A51248)
Neckover GL24-2-7K Gooseneck Trailer  24ft Deck, Dual 7K Axles, 14K GVWR (A55302)
Neckover GL24-2-7K...
2019 TEREX PHOENIX 2100 TROMMEL SCREEN (A56129)
2019 TEREX PHOENIX...
 
Top