Piranha Pallet Forks/Tillers

[JohnVa]

I have a Kubota L295DT with a FEL and Box Scraper.

I am interested in forks that could replace the bucket on my FEL. The Piranha Pallet forks seem to do that?

Am also interested in Tlllers. I think a 60" would be about right for me.

Do any of you use these or similar ones and have pictures you could share? All the pictures I have found showing tillers in operation have been super small.

John

 

[creeper]

As for the tiller, they work a tractor pretty hard. I dont think you would want to go over 60". Agri-supply has some less expensive ones or if you tell me where your at I may have some other contacts for you.I have not seen the piranha forks,you can do a search for forks on here and get alot of info on many types. Hope this helps. If your not on a budget your dealer can get you a nice set of forks also.

 

[JohnVa]

Creeper,

I am in Woodbridge Va, but my tractor is in Crossville Tn about 60 mi west of Knoxville on I-40. I do run up and down I-81 to get there /forums/images/graemlins/smile.gif

John

 

[KennyV]

I have a set of Pirranha forks I use on my L4200… they are very well built and very handy. Don’t know who has the best tiller for the $ but a large tiller would make good counter ballast to use with the forks. .
Forks are on loader in attached . KennyV.

 

[creeper]

I would reccomend trying these guys I will try to post a link here. They are right off 95 in petersburg. web page

 

[LBrown59]

All the pictures I have found showing tillers in operation have been super small.
JohnVa
===========

The tillers or the pictures?

 

[Hypernix]

Hello John,

Here's 3 pictures of my Bhuler FarmKing 60" tiller.
This tiller is well built and is probably going to last a long time for what I'm using it anyway. If I were to buy another one, I would go smaller because the garden I'm using the tiller for is a bit small /forums/images/graemlins/blush.gif But it's my dealers fault! I had agreed on a Agric 54" if I remember and brought me that one for no additionnal $! /forums/images/graemlins/laugh.gif

It does also make a good ballast for loader work!

Hypernix

 

[Hypernix]

Picture #2

 

[Hypernix]

And picture #3

Enjoy!

Hypernix

 

[ronjhall]

My son and I did his front lawn 2 summers ago. Here is a picture of him tilling with my B2910. Click Here