OP
Waldon52
Platinum Member
Ha, Ha, Waldon is not my name. My name is Don Campbell .
Pit Cart Project Started
- Thread starter Waldon52
- Start date
- Views: 26928
OP
Waldon52
Platinum Member
Garden Tractor Grader Blades- Over the years I have built 15 or so small tractor blades. But I have never shared that a few of them I still have have never seen dirt or snow. It would be great fun to plow snow with them but they get packed away like sardines in the back shed. They would just be in the way all winter otherwise.
KubotainNH
Veteran Member
OP
Waldon52
Platinum Member
JD 730 Narrow Front / Trip Bucket Loader- Here is another fun project I built. I had never seen anyone build a old fashioned trip bucket style loader on a narrow front garden tractor. So I had to do it, ha,ha. Today the loader is off of it and it is also packed in the back shed for the winter months. Now it has rear duel wheels and I love how it looks. I have always loved duel wheels on tractors. My little grandson loves grandpas little tractors.
OP
Waldon52
Platinum Member
John Deere Cab- Here is another project I built but never used. I scratch built this cab and tweaked the front snowblower and took a old 59" front mount snowblower and tweaked it into a rear box scraper. This was another very fun project. I did sell this one to a fellow in the U.P. of Michigan.:thumbsup:
ultrarunner
Epic Contributor
- Joined
- Apr 6, 2004
- Messages
- 23,676
- Tractor
- Cat D3, Deere 110 TLB, Kubota BX23 and L3800 and RTV900 with restored 1948 Deere M, 1949 Farmall Cub, 1953 Ford Jubliee and 1957 Ford 740 Row Crop, Craftsman Mower, Deere 350C Dozer 50 assorted vehicles from 1905 to 2006
Simply amazing!!!
OP
Waldon52
Platinum Member
Thanks !!
BEARING BUSTER PROJECT- Yesterday I built this little tool rather than pay $40.00 plus shipping on line. Just a piece of pipe welded to a piece of steel rod , then I took the plasma cutter and cut a strip out of the pipe just wide enough to slip over the shaft to knock out the bearings from the inside. Another fun little winter project.
BEARING BUSTER PROJECT- Yesterday I built this little tool rather than pay $40.00 plus shipping on line. Just a piece of pipe welded to a piece of steel rod , then I took the plasma cutter and cut a strip out of the pipe just wide enough to slip over the shaft to knock out the bearings from the inside. Another fun little winter project.
OP
Waldon52
Platinum Member
Lawn Trailers- Over the uears I have had so much fun building small trailers , wagons and sulkies. Often from scraps around and tires I picked up cheap or even got many of them free.
As a young boy I enjoyed pulling three real wagons up and down the roads on the farm during harvest time. So hooking these little trailers together brought back fond memories of those days so long ago. What great fun it has been in my little shop.
As a young boy I enjoyed pulling three real wagons up and down the roads on the farm during harvest time. So hooking these little trailers together brought back fond memories of those days so long ago. What great fun it has been in my little shop.