Plowing in conduit/pipe/duct pictures.
- Thread starter Fixastuff
- Start date
- Views: 11622
Complete Turf Care
Veteran Member
- Joined
- Mar 31, 2013
- Messages
- 1,903
- Location
- South Louisiana
- Tractor
- 2022 Kubota Grand L6060 (no loader), 2017 Kubota Grand L6060, 2011 Kubota L5740 HSTC-3, 1997 Kubota M4700
What's holding the pipe on the bullet? Looks like it's just slipped on...
It’s a carrot. Screws into the inside of the pipe. Holds very tight Chinese fingers get torn up too fast in the rocks.
Complete Turf Care
Veteran Member
- Joined
- Mar 31, 2013
- Messages
- 1,903
- Location
- South Louisiana
- Tractor
- 2022 Kubota Grand L6060 (no loader), 2017 Kubota Grand L6060, 2011 Kubota L5740 HSTC-3, 1997 Kubota M4700
Interesting. Seems the pipe would pull off.
Pipe breaks before carrot slips. You need a three foot bar to screw the 2” carrot in fully.
Sportsman762
Platinum Member
- Joined
- Mar 28, 2008
- Messages
- 913
Those look like the taper taps I used in the water well industry. They had buttress threads so that the pipe would not slip off. We used them to fish pipes out of the wells. It was impressive how much weight that they could hold.
John0829
Veteran Member
GREAT seeing an 8N doing what it was made to do.
