Pole Barn Sliding Door Help

[Beckbean]

Hello All,
I am new to this forum and looking for some assistance. I am in the middle of building a pole barn 30'x50'x12'. I have my frame up and getting ready to order the r-panel, trim and doors (Kwik Frame sliding) from Cannonball. Were I am running into trouble is with installing the hardware, trim etc. I will have two doors both on the gable ends (1) 13x12 double (12'x12' opening) and (1) 10'x12' single (9'x12' opening). I have looked all over the internet looking for details and understand how it all goes together at the door opening with the track board track and track cover. where I am a little confused on both sides of the door opening. Will the siding need to be two pieces, or notched. Does anyone have any detailed pics of their sliding doors that would help me understand. Thanks in advance.
Billy

 

[powerpace]

The support board or beam will be against a solid support. If you already have the siding on it needs to be notched. If not on, put on the support board and rail and track cover. Lap the siding over the track cover at the top. Install the siding below the support on the bottom.