Please don't take this the wrong way... but it's a bit funny to me, since you only posted once in the "New Members" forum...
I'll post a welcome to the few new members that I had *something* in common or they had asked for some help....
Political Correctness on TBN?
- Thread starter mcd176
- Start date
- Views: 17704
I'll post a welcome to the few new members that I had *something* in common or they had asked for some help....
tallyho8
Elite Member
- Joined
- Aug 1, 2004
- Messages
- 4,537
- Tractor
- Kubota L4400, Kubota ZD326
I believe that the reason new members aren't welcomed by more old members is because this is such a large forum with about 10 new members a day. Nobody has time to post welcomes to all the new members daily.
Last edited:
riptides
Super Member
We could always do it programatically, set up a profile bit and script away....
that way every new member can get upwards of 10k personal welcome PM's to read on joining.
that way every new member can get upwards of 10k personal welcome PM's to read on joining.
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 58,182
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Oh gosh, no!We could always do it programatically, set up a profile bit and script away....
that way every new member can get upwards of 10k personal welcome PM's to read on joining.
tallyho8
Elite Member
- Joined
- Aug 1, 2004
- Messages
- 4,537
- Tractor
- Kubota L4400, Kubota ZD326
Correction: In the last 24 hours, there were 56 new members. That's a lot of new members to greet everyday!
So..........................WELCOME EVERYBODY!!!!!!
Redgoatea
Gold Member
Bump. 7
As a "new member" I found this very enlightening now if only I could find one listing all the acronyms everybody uses.7
7As a "new member" I found this very enlightening now if only I could find one listing all the acronyms everybody uses.
7
Marveltone
Veteran Member
- Joined
- Jun 20, 2010
- Messages
- 1,411
- Location
- Somewhere north of Roseau, MN
- Tractor
- Fordson Major Diesel, McCormick Deering W4, Ford 1510, John Deere L111
Bump.
As a "new member" I found this very enlightening now if only I could find one listing all the acronyms everybody uses.
Excellent idea! I've picked up on a lot of the acronyms and other jargon, but a TBN on-line dictionary (or at least a sticky thread) would be a very helpful tool indeed.
Still learnin'! :thumbsup:
Joe
dcyrilc
Elite Member
Bump.
As a "new member" I found this very enlightening now if only I could find one listing all the acronyms everybody uses.
If you find one that you can't figure out, just ask politely. You'll get quick answers.:thumbsup:
The three which hung me up were:
1) IIRC - if I recall correctly
2) FWIW - for what it's worth
3) YMMV - your milage may vary
I had to ask about all three.:laughing:
Redgoatea
Gold Member
Thanks Cyril of those three I've only seen the IIRC so far. Now I can keep my eyes out for the other two. 7
7
john4153
Bronze Member
- Joined
- Jun 2, 2010
- Messages
- 72
- Tractor
- Case DX40
PHD - post-hole digger, what else could it be?
John
John
