GregJ
Platinum Member
- Joined
- Oct 8, 2002
- Messages
- 708
- Location
- Washington
- Tractor
- Kubota B2301/LA435FEL/BH70 ; John Deere X350
This past summer I worked on a project for a neighbor. I posted some questions while it was under constructions at 2 Ponds and a River . My part of the project basically involved all of the holes and ditches in the ground. My neighbor had a contractor working at his place for close to 3 months solid and a good part of this time was finishing this "water feature". I promised to show some finished pictures, so here they are. Although the landscaping isn't totally complete, the basics are in. I'll show the pictures from the lower pond up to the upper pond. I found this very difficult to get good photos, so bare with me. The attached picture is the lower pond with the two inlets.
Greg
Greg