Post Trenching Trench Cleanout - MicroHoe

   / Post Trenching Trench Cleanout - MicroHoe #71  
The bucket is 8 inches wide at the front and rear of the bottom panel which is 24" in depth. The back plate is 1/2" thick and is 8" at the bottom and 12" at top and 18" top to bottom giving it an outward slope. The sides start at 6" and rise to the 18" at back. Material is 1/4 inch plate except for the back which is 1/2 inch.
 
   / Post Trenching Trench Cleanout - MicroHoe #72  
Now, that is what I call good thinking and good thought out design. The steel thickness, and layout is more than adequate for the intended purpose. Keep up the good work
 
   / Post Trenching Trench Cleanout - MicroHoe
  • Thread Starter
#73  
Very nice. I am jealous.

Bob Rip
 
   / Post Trenching Trench Cleanout - MicroHoe #74  
<font color="blue"> packed dirt into the bucket and I had to hose if out <font color="black">
On a backhoe you can weld a short length of chain to the stick just beyond where the bucket pins on. When the bucket is currled outward the chain tears through the dirt or mud and helps release it from the bucket. Maybe there is a simmilar way you could do this on your design???
 
   / Post Trenching Trench Cleanout - MicroHoe
  • Thread Starter
#75  
Thanks for the idea. I will have to think about that.

Bob Rip
 

Tractor & Equipment Auctions

2022 GTS FS35-G2 Flex Draper Header (A50657)
2022 GTS FS35-G2...
New/Unused 2025 CFG MX50R Mini Excavator (A48837)
New/Unused 2025...
2003 Big Tex 10PI 16ft. T/A Pipe Top Utility Trailer (A49461)
2003 Big Tex 10PI...
BUNDLE OF HEAVY DUTY INSULATED PANELS (A50460)
BUNDLE OF HEAVY...
Carryall 1700 4x4 Diesel Utility Cart (A49346)
Carryall 1700 4x4...
2018 NISSAN TITAN PICKUP TRUCK (A50505)
2018 NISSAN TITAN...
 
Top