Power Steering for a case 235 H

jonesiera · May 17, 2002

Still need help to install power steering on case 235 as that was not an option. how about it. I'm not smart enough to figure it out. I/m willing to pay a reasonable price

buppy69 · May 25, 2002

Are you willing to pay $900 for parts. I just did that on a Hinomoto.

Eugene

jonesiera · May 25, 2002

Yes, I'm willing to pay a $1000,00 . I can't use a torque generator and it's almost impossible to fit power steering on the Unit. The Case Dealer says it can't be done. I know anything can be done,but iis it to much machine work!
BJ

buppy69 · May 25, 2002

I bought a generic kit with a cylinder and hydraulic block. I had to have hoses made. The cylinder mounted on the transmission where the front loader normally bolts. It took only about an hour and a half to install everything including hoses. It was very easy.

jonesiera · May 25, 2002

My steering Column garbox is only about 2 1/2 ft long and it bolts right to the top of the transmisson housing and the drag link is about 3ft and there is no place to mount the cyl. woulld you have a picture ? your drag link is probably easier to get to than mine. the drag linkis about 1" in dia..