Problem with my Select-O-Speed (10 forward and 2 reverse speed powershift) Tranny on my 1965 Ford 3000

   / Problem with my Select-O-Speed (10 forward and 2 reverse speed powershift) Tranny on my 1965 Ford 3000 #1  

Old Guy 14

New member
Joined
May 29, 2021
Messages
1
Tractor
1965 Ford 3000
As I was leaving the pasture I stopped my tractor to dismount and open the pasture gate. As I started to dismount my wife beat to the gate and opened it for me. I released the parking brake and put the selector in 3rd gear. The tractor would not move. Thinking I may have not placed the selector in the proper positions I placed the selector in the neutral position and then moved the selector back to the 3rd gear selection. The tractor still did not move. I did noticed that when I moved the selector to the neutral position the tractor relaxed as it went out of gear, but when I put it back in 3rd gear it gave no indication that it had not gone into in gear. I am not sure what is going on and could sure use some insight as to what I should look for and correct to get my tractor back in business. Thanks.

Old Guy 14
 
Last edited:
   / Problem with my Select-O-Speed (10 forward and 2 reverse speed powershift) Tranny on my 1965 Ford 3000 #2  
Does it work in any gear? When our 5000 with select-o-speed quit it was in all gears. Problem on the 5000 was main input spline broke which cost more to repair than tractor was worth.

I replaced the select o speed with standard manual transmission and it is still running today
 
   / Problem with my Select-O-Speed (10 forward and 2 reverse speed powershift) Tranny on my 1965 Ford 3000 #3  
As I was leaving the pasture I stopped my tractor to dismount and open the pasture gate. As I started to dismount my wife beat to the gate and opened it for me. I released the parking brake and put the selector in 3rd gear. The tractor would not move. Thinking I may have not placed the selector in the proper positions I placed the selector in the neutral position and then moved the selector back to the 3rd gear selection. The tractor still did not move. I did noticed that when I moved the selector to the neutral position the tractor relaxed as it went out of gear, but when I put it back in 3rd gear it gave no indication that it had not gone into in gear. I am not sure what is going on and could sure use some insight as to what I should look for and correct to get my tractor back in business. Thanks.

Old Guy 14
I like Fords, but have never owned a select-o-speed.
I never did have confidence in that 1960's Ford tractor system.
 

Tractor & Equipment Auctions

2018 KENWORTH T680 SLEEPER (A45676)
2018 KENWORTH T680...
Massey Ferguson 399 2WD Utility Tractor (A47809)
Massey Ferguson...
John Deere 6115M (A44501)
John Deere 6115M...
Grain Auger w/ Motor (A47809)
Grain Auger w/...
PT 1000 Gal Supply Tank (A47307)
PT 1000 Gal Supply...
Yamaha Big Bear 400 4WD ATV (A47484)
Yamaha Big Bear...
 
Top