prodigy brake controller

[bjess8]

I have a prodigy brake cotroller not sure what model but I know it cost me
$150, anyway when I press on the brake the numbers get higher and I know thats ok but when I push hard on the brake the numbers get higher then I get a error message which reads oL does anyone know what is causing this?I am sure the message means over load but it never did it before until this week when I used the dump trailer.any help would be appreciated.thanks

 

[Diamondpilot]

Check all the grounds on the trailer. I would also check the entire wiring and the magnets. To make sure your trucks wiring is ok, hook up to a buddies trailer and check things out. You don't even have to tow it, just back up close and hook up the plug then try out the brakes.

Chris

 

[PBinWA]

You can get all the manuals in PDF format here:

Tekonsha

 

[wushaw]

Do what Diamondpilot said, this will rule out 50% of the possible causes.

 

[MarkLeininger]

I'd call or email Tekonsha. They replied to me in a few hours and told me exactly what to do to diagnose the problem I had. Took 5 minutes to fix it out once I knew what was wrong.

 

[bjess8]

I'd call or email Tekonsha. They replied to me in a few hours and told me exactly what to do to diagnose the problem I had. Took 5 minutes to fix it out once I knew what was wrong.

ok thanks for all the advice.