JohnDeere4300
Veteran Member
OK,
That is a good setup you did with the pallet.
The way i had mine was on a skid that stayed on the ground and i didn't have it fixed to lift with my 3-point.
Its about time but thanks
Generator PTO Generator?
- Thread starter PUSHINDIRT
- Start date
- Views: 11193
OK,
That is a good setup you did with the pallet.
The way i had mine was on a skid that stayed on the ground and i didn't have it fixed to lift with my 3-point.
Its about time but thanks
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
IMHO.. it's unsafe to run the gen with it not mounted.. even on the skid, that's alot of rotational energy and they can flip .. by bolting mine to the carry-all it not only makes it easy to transport.. but makes it stable as well.
soundguy
soundguy
Here are some similar links:
